Chrome_Pony's latest activity

Looks like repurposed Jeep shit. The center of the top should have some support and not put it all on the brackets. Find a molded...

I've done this mod on my f150 its pretty easy I am going to do the bronco, ill take lots of pics. I'm sure theres a play by play...

How is it that my MIC top is cracking under the weight of air and yours is holding up a roof?

If DT is still doing guaranteed satisfaction, could see if they'll swap the 315 Bridgestone Dueler AT REVO 3s since they are only +4.2lb...

I'm in. Paypal work?

Put these on my 23 WT 2 door and they are so much better than the stock Goodyear's IMO. But I drive only on country roads, rocky roads...

Nice to hear a real world review. I am still considering them for the switch to 315s from 285s, since the price difference isn't that...

Bump

3M VHB tape should work, it's what holds fender flares on the metal for many OEMs. Be a bit tricky to get it in there as is though.

Small PC fan or two should keep temps reasonable in there without impacting capacity too much if you were really worried about it...

High end and harbor freight don’t belong in the same sentence.

Dang, that Warn bumper is a lot deeper than most online shots make it look! Thanks for the pictures. Almost went with that exact Warn...

I have decided to sell my Putco clear top. I am so glad that a company got creative and made this product but it does not work with my...

Whoa! Been waiting to see real pics and not the website ones. If only they made the 2dr version.

Normally, I'm all for receiver mounts, but the Bronco hitch mount, even with the Raptor bars, is essentially a taco that bolts through a...

It's a working horse. Dragging chainsawed brush out of the street after thinning alder and birch for my spruce. Warn made quick work.

What do you mean by "kind of" works? Do non Raptor lights flash with turns? I've never seen them from the outside.

Neat bit of history. Wonder what my old 75 stickered for back in the day.

You can use a spray foam in a can solution but mine sounded better left open and then loosely filling with poly-fill. The DVC Kicker 8"...

Interesting. Have the parts to do the 6.5 to 8 swap, but haven't come across anyone sealing the factory sub box. How did you do it?

I like the grittier exterior texture vs the OEM. I wonder if the Putco Skyviews will be compatible? ?

Flip up glass, drop down tailgate, this is the way. Sadly I don't think the spare location and mounting would have permitted this on...

Well, I didn't know they expired either, so this thread helped me use all 62K of mine on some Squatch flares + 15% off just a little bit...

Can't be seized if it's a liquid.

Squatch flares for the eventual jump to 35s, just need the AR172s, Eibach Pro Kit, and then we're off to 35" AT/KOs.

Uh, dang. I think I just snagged Squatch flares to my parents place for 150 bucks with points I was never going to be able to use in AK...

Hope it's not manual dependent. I would much rather have the on-demand torque and mileage of a diesel, but would prefer to keep the...

A red bezel would be nice. Paint isn't holding up long term over the good anodizing you guys have.

I'm after something similar, but adding the heated wheel HVAC unit. Neat to see that it works plug and play.

Planning on sticking my Banks iDash on a superlow mount that uses the grab handle screws just ahead and slightly left of where your...

If solo recovering someone else with my Bronco, I 4-wheel chock with aggressive spiky units, pull in some cable to draw the front end...

well, Winter stopped it for a couple months 😅

Transplant a small turbodiesel and I'll start actually paying attention to engine swaps.

Let's just fix that last pic with a quick and dirty accurizing photoshop

Well, do the math and double check your manufacturer warranty, in case this happens..

Some old school, some new. The KCs are the least impactful on overall lighting, but they definitely look the part.

The answer will depend on Ford not fucking it up, which historically, is not their strong suit.

With the RC muffler delete, you solve the problem, as nothing piped in is ever going to cover that up. 😅 And you lose 50 pounds or so...

A PM and I got a refund almost immediately. Hard to find better service these days.

Oh nooo. I did similar. I was installing an engine, we had the engine on the hoist still, with the engine in place, in the engine bay. I...

Metal-tech 4x4 sliders carry a lifetime warranty. In MT4x4's 24 years, we have replaced less than six sliders out of thousands built...

Agree. Although my plan was to mount a camera on the interior surface of the glass behind the wiper swipe, so I didn't need to clear it...

Craigslist has Ranger takeoffs right now. https://anchorage.craigslist.org/wto/d/anchorage-alloy-rims-for-ford-ranger/7720452316.html

Email them and request the brackets. They'll gin up an invoice, get payment from you and ship the item to you even if it's not on the...

I believe it's different for the front camera mount. I ended up removing mine for the winch bumper install... several times

Yes. Lift glass, get light. Looked into a tilt switch, but couldn't find a decent one. I'll be doing the physical switch first...

Are you supposed to leave the speed sensitive volume off after the initial setup?

No. I am, however, going to hardwire it and put it on a magnetic switch to auto-on, the way it should work. This shit is really...

I was just going to type this, but worse. 😅 The always on +/- is one thing I really like about the 10R60. I can command a shift for a...

There's the good ol' RC experience 😅 I had my Brave bumper and skids bedlined. Highly recommend for salt/gravel winter areas where...