Factory Fog Light Switch

[geoking]

Could you please tell me what the part number is for that switch, that is the one I need.

Could you please tell me what the part number is for that switch, that's the one I need?

I have the PN somewhere in all my order confirmation emails. I will try to find for you. If you want this switch , IT is yours for 75 dollars plus the actual ride cost. I don't know if it will work for your Bronco. DO YOU HAVE THE FACTORY HARNESS ? That's the big deal. smile

Sponsored

 

[geoking]

Could you please tell me what the part number is for that switch, that is the one I need.

Could you please tell me what the part number is for that switch, that's the one I need?

M2DZ-11654-BA. single fog no puddle lamps

 

[zedster]

I ordered ML3Z-11654-DA and swapped over the puddle switches to the new main switch. It came quickly. I have not changed any FORSCAN settings yet.

 

[Wirenut20]

I ordered ML3Z-11654-DA and swapped over the puddle switches to the new main switch. It came quickly. I have not changed any FORSCAN settings yet.

Does the new switch work just like the original minus control of the fog lights?

 

[zedster]

Does the new switch work just like the original minus control of the fog lights?

Yes it does.

 

[Wirenut20]

Yes it does.

Thank you

 

[LanCar]

M2DZ-11654-BA. single fog no puddle lamps

Thanks for the information.

 

[Wirenut20]

Just a heads up. I ordered the part number M2DZ11654DA, single fog light with puddle lamps and I received a part number M2DZ11654DB, but it looks exactly the same as the part number that I ordered

 

[WuNgUn]

Still no sign of the Euro, dual fog switch I ordered.
I fear Ford will no longer be stocking these in their north American warehouses? The jig is up!

 

[TNcoupe]

So has anyone successfully wired up a set of Baja Design lights to work with the factory fog light switch? My Badlands is being built this week with the capable bumper and I already have a BAMF bumper with Baja Designs S4 Pro and S2 Sports on it. I would like to wire up the S2s to the factory fog light switch if possible.

 

[drew707]

So has anyone successfully wired up a set of Baja Design lights to work with the factory fog light switch? My Badlands is being built this week with the capable bumper and I already have a BAMF bumper with Baja Designs S4 Pro and S2 Sports on it. I would like to wire up the S2s to the factory fog light switch if possible.

Yes I wired up my BD fog lights to the factory wiring

 

[TNcoupe]

Yes I wired up my BD fog lights to the factory wiring

Sweet. Do you happen to know the amp rating on that circuit? The S4s draw a decent amount and the S2s are negligible. Just trying to decide which one I want to wire to the fog light switch and which ones I need to wire to the aux switch.

 

[drew707]

Sweet. Do you happen to know the amp rating on that circuit? The S4s draw a decent amount and the S2s are negligible. Just trying to decide which one I want to wire to the fog light switch and which ones I need to wire to the aux switch.

I honestly forget. They are 16 gauge wires so at least 10 amps. I run the S4's off them as a daily. There is no physical fuse. Part of the modernization of these vehicles is that a lot of these circuits are controlled by FET and just measure power draw to determine if a circuit is overloaded. Basically it's a software breaker switch, pretty neat actually. This would be the limit and I don't know what it's set at.

For reference though the 25A Upfitter is an 18 gauge wire

 

[TNcoupe]

I honestly forget. They are 16 gauge wires so at least 10 amps. I run the S4's off them as a daily. There is no physical fuse. Part of the modernization of these vehicles is that a lot of these circuits are controlled by FET and just measure power draw to determine if a circuit is overloaded. Basically it's a software breaker switch, pretty neat actually. This would be the limit and I don't know what it's set at.

For reference though the 25A Upfitter is an 18 gauge wire

Thats good to know. I bought the driving/combo S4s so that would be the good one to wire up to the factory switch

 

[BigHoof]

Just a heads up. I ordered the part number M2DZ11654DA, single fog light with puddle lamps and I received a part number M2DZ11654DB, but it looks exactly the same as the part number that I ordered

Same exact part but the "DB" represents the latest revision.

Sponsored