- First Name
- AJ
- Joined
- Oct 25, 2021
- Threads
- 21
- Messages
- 225
- Reaction score
- 982
- Location
- Orange County California
- Vehicle(s)
- Multiple
- Your Bronco Model
- Big Bend
- Thread starter
- #1
Hey 6G,
We're excited to announce the release of our new Coil Spacer Lift. These spacers offer a lower cost alternative to add a little more space to fit that next size tire you're eyeing, or to get some extra clearance for those bigger obstacles. We designed these to add an additional 2” of lift over stock, while keeping the rest of the drivetrain happy by maintaining the stock geometry and travel parameters.
Key Features:
Cheers,
AJ
Edit / Product Update 05.06.22:
After speaking with many of you last week, we got a general consensus that people wanted a little more height.
So this week we test a bunch of differnt heights, and settled on changing these to a lift that produces 2.25” of lift up front and just over 2” in the back.
This height is based off the change from the floor to the fender. This creates a more leveled look, but also has slight rake for performance.
Thanks again for all the feedback and support. We appreciate you taking the time to help us make the best products possible. This change will be reflected on all the orders placed, and all orders moving forward.
Link to: SVC Website Coil Spacer
Link to : SCV Baja Rear Bumper
We're excited to announce the release of our new Coil Spacer Lift. These spacers offer a lower cost alternative to add a little more space to fit that next size tire you're eyeing, or to get some extra clearance for those bigger obstacles. We designed these to add an additional 2” of lift over stock, while keeping the rest of the drivetrain happy by maintaining the stock geometry and travel parameters.
Key Features:
- Two Inch Lift over stock
- Better Than Top Hat Spacer Designs Which Change Geometry
- Better Controlled Brake Dive
- Increase Spring Pre-Load
- No Change In Suspension Travel Parameters
- Front and Rear Spacers Included
- 6061 Aluminum
- Machined In The USA
- Guaranteed For Life Of The Truck
Cheers,
AJ
Edit / Product Update 05.06.22:
After speaking with many of you last week, we got a general consensus that people wanted a little more height.
So this week we test a bunch of differnt heights, and settled on changing these to a lift that produces 2.25” of lift up front and just over 2” in the back.
This height is based off the change from the floor to the fender. This creates a more leveled look, but also has slight rake for performance.
Thanks again for all the feedback and support. We appreciate you taking the time to help us make the best products possible. This change will be reflected on all the orders placed, and all orders moving forward.
Link to: SVC Website Coil Spacer
Link to : SCV Baja Rear Bumper
Sponsored
Last edited: