Napa has curt wiring harness onsale

[Richterman]

Right now napa has curt harness 56468 on sale for $57.49

Sponsored

 

[sgraing1]

Thanks for the information.

 

[Blaylock1988]

Mine just arrived from NAPA. It was actually just a direct ship from Curt when looking at the shipping label. I'll be using this plus a Hopkins 7 pin wiring kit to do a full 7 pin plug install.

 

[AZSky]

Mine just arrived from NAPA. It was actually just a direct ship from Curt when looking at the shipping label. I'll be using this plus a Hopkins 7 pin wiring kit to do a full 7 pin plug install.

Tell us more, links ..

 

[Richterman]

Mine just arrived from NAPA. It was actually just a direct ship from Curt when looking at the shipping label. I'll be using this plus a Hopkins 7 pin wiring kit to do a full 7 pin plug install.

Yes tell us more....

 

[Blaylock1988]

Yes tell us more....

Tell us more, links ..

So Curt 4 pin harness, + this Hopkins 7/4 plug and mount, + the Bronco Trailer Brake Controller (I plan to use my ford pass points on that), + these terminal pins from Flip, will let me get the brake controller (C201), reverse (C105), and trailer running lights (C201) from the connectors above the drivers fender liner. Then I'll grab power for the Curt module and for the trailer power at the blue/red wires in the drivers taillight area. I'll then cut off the 4 pin connector and wire that plus the 3 wires from the engine bay to get the full 7 pins. I might have a redundant power source but you get the idea.

It will be a few weeks before I can do the installation.

Credit to these guys https://www.bronco6g.com/forum/thre...ed-contents-inside.17659/page-18#post-1175144 https://www.bronco6g.com/forum/threads/tow-package-arrived-contents-inside.17659/page-17 https://www.bronco6g.com/forum/thre...r-wiring-harness-out-for-bronco.25164/page-12

 

[mdfilip]

is curt the only company that currently makes wiring harness? Also on etrailer they list 2 different curt harnesses for with LED lights and one without? anyone know if this one from NAPA will work with LED lights

 

[Richterman]

Etrailer has 1 made by curt $89 and 1 made by tekonsha $118 both for led tail lights. The napa is selling the same curt kit for $57.
All made for led tail lights

is curt the only company that currently makes wiring harness? Also on etrailer they list 2 different curt harnesses for with LED lights and one without? anyone know if this one from NAPA will work with LED lights

 

[mdfilip]

etrailer has 3

https://www.etrailer.com/t1-2022_Ford_Bronco.htm

 

[Techun]

etrailer has 3

https://www.etrailer.com/t1-2022_Ford_Bronco.htm

Looks like they actually have four. Two for LED and two for regular tails.

I'm going to buy the cheaper version for regular taillights.

Edit -im wrong and they have three just for non-led tails alone

Sponsored