- Thread starter
- #1
I have successfully changed tire size and used the 'plan English" programming to disable the horn beep when leaving with the key.
I cannot program anything using the as built sections. I tried the horn beep using as built and got the same error.
"Service procedure has been interrupted"
Running the newest Forscan 2.2.48 and OBDLinkEX firmware 5.6.24
I have a 2021 F150 and had no issues programming the AsBuilt.
Trying to change 730-03-01 023A to 003A to disable Auto Start/Stop. I get the checksum error and press OK.
I tried entering checksum manually (0038), I get no checksum error but still fails the write with "Service procedure has been interrupted".
Also tried the single write and write all options...no luck.
I cannot program anything using the as built sections. I tried the horn beep using as built and got the same error.
"Service procedure has been interrupted"
Running the newest Forscan 2.2.48 and OBDLinkEX firmware 5.6.24
I have a 2021 F150 and had no issues programming the AsBuilt.
Trying to change 730-03-01 023A to 003A to disable Auto Start/Stop. I get the checksum error and press OK.
I tried entering checksum manually (0038), I get no checksum error but still fails the write with "Service procedure has been interrupted".
Also tried the single write and write all options...no luck.
Sponsored