Mabett Mud Flaps 30% OFF NOW through 8/31!!

[Mabett]

30% Discount Code: https://www.amazon.com/gp/mpc/A1PUIMJ7EJ76LB
Note: Please use a computer to open this URL
If you have successfully installed Mud Flaps, you can participate in this giveaway!

PRODUCT DESCRIPTION​

• 【Custom Molded】Fit full-size BRONCO, Fit All trim levels, Fit Sasquatch set, Accommodates factory rock rails or tube steps (If you have 35"s aftermarket wheels and no lift they will rub in some cases)​
• 【Protect Your Vehicle】Protect fender and rocker panel from stone chips, slush, dirt and debris.
• 【Prevent Accidental Sputtering】Protect your ride and those around you from the rage of the road.
• 【Durable Material】Durable, impact resistant all-weather thermoplastic material
• 【Buy with Confidence】It's free to return items if for any other reason you are not happy with your decision to purchase mabett mud flaps

I would recommend watching the installation video, as the instructions contained in it have some problems​

Sponsored

 

[E. Davis]

JUST PURCHASED!! Thanks Mabett!

 

[ProdigyJKU]

You may want to use stainless nuts and bolts as mine are already covered with rust after just a few weeks. Otherwise very happy with them.

I would recommend watching the installation video, as the instructions that are included are contradictory.

 

[Lexo52]

Link is not working for me

 

[Mabett]

You may want to use stainless nuts and bolts as mine are already covered with rust after just a few weeks. Otherwise very happy with them.

I would recommend watching the installation video, as the instructions that are included are contradictory.

I'm sorry you guys. . . I am solving the problem of rusting of bolts and nuts. If this problem has already occurred, you can contact me and I can reissue. Of course, the best thing is to go to the hardware store to buy it yourself. You can tell me how much it cost and I will transfer it to you

 

[Mabett]

Link is not working for me

try computer

 

[Mabett]

I would recommend watching the installation video, as the instructions contained in it have some problems

 

[Skeener801]

@Mabett are you ever going to be able to offer just the rear mudflaps? I know you offer just the fronts, but can you or will you be offering just the rears?

 

[MudMonsterRacin]

If u add just the fronts to this ill buy them now instead of waiting till mine gets built.

 

[Mabett]

@Mabett are you ever going to be able to offer just the rear mudflaps? I know you offer just the fronts, but can you or will you be offering just the rears?

Sorry, I don't offer the rear mud flaps kit at the moment, if you need it, you can buy it from me separately, but the shipping is expensive

 

[MudMonsterRacin]

@Mabett are you ever going to be able to offer just the rear mudflaps? I know you offer just the fronts, but can you or will you be offering just the rears?

Shot you a PM

 

[SoxFan]

Just installed the full set on the Bronco, while I like the looks and the protection appears to be very good, the hardware is cheap. One rainy day and all the bolt heads are rusting, one day! I will have to swap them out with some stainless ones to avoid it looking like this....

 

[MNBronc]

Made an extension for the Mabett flaps. Now protects a little farther back. The BD General tires are also rock throwers.

 

[MNBronc]

Some install comments after installing the Mabett front flaps.
- I used stainless bolts and clips from Amazon.
- The bolts that go into clips on the fenders should be 20mm instead of 16mm long. A couple were hard to get started. It would be easier if they were longer
- Mabett should provide a new longer push pin for the in-board hole or maybe a screw. It is very hard to get engagement when you add the flap thickness.

Clip and bolt info:

https://www.amazon.com/dp/B0B529J9H4?psc=1&ref=ppx_yo2ov_dt_b_product_details

https://www.amazon.com/dp/B07PT62TCS?psc=1&ref=ppx_yo2ov_dt_b_product_details

 

[TCC]

I purchased the front flaps Aug 3, delivered Aug 10. Is there still a way to get the 30% discount credit?

Sponsored