Child seat installed in a 2021 Bronco 4-Door (photos)

[KirchTX]

Good pics.... new dad here, I was wondering what this would look like.

That’s even my trim and color ?

I recommend the seat protectors you lay down between the carseat and the actual leather/vinyl/whatever. Not just for spills, but a lot of carseats have sharp edges that will indent the seat material.

Sponsored

 

[Tdubz]

This actually doesn’t look like much space. Probably fine for newborn car seats and the booster seats, but if you put a convertible car seat back there, your kids knees are going to be in their chest.

 

[broncoSJ]

just so you know - late availability on that car seat. and the kid is an aftermarket option only. kid will put the Bronco over GVWR

 

[KirchTX]

Not to worry, LATCH System is included on all models.

https://www.ford.com/suvs/bronco/2021/models/bronco-base/

They just threw any old seat in there for size purposes.

 

[drive21bronco]

Pics and notes per B N

A couple notes and impressions:

• Taller folks might have to move the seat forward a bit if you’re using a child seat in the rear facing configuration.
• If your child is on the larger side or about to move out of needing a booster, you’re probably going to get back of your seat kicked. Pretty common in most vehicles, Bronco isn’t an exception here.
• It’s easiest to go ahead and remove the head rest when installing.
• Usual disclaimers apply here. It’s a pre-production Bronco that may or may not represent the final product that’s delivered tonconsumers

Lets see them in a 2 Door

 

[knkut]

Evenflo.....thoughts arrive like butterflies...



(had to)

 

[dgorsett]

Is this the Navy Pier everyone is talking about?

 

[VelocityBronco]

Not that it matters a ton, but why no hooks for the child seat. I thought they were standard by now.

The latches are only used until the kid reaches a certain weight, 35lbs maybe, then have to use the seat belts.

 

[Captain nSANEo]

Finally some cupholders.

This is gold! ???

 

[KirchTX]

The latches are only used until the kid reaches a certain weight, 35lbs maybe, then have to use the seat belts.

Looked it up. 65lbs combined weight between kid + seat is the limit. I might need to weigh my seats when I get home...

I hate using the belt. It never cinches down as well as the latch system does.

 

[Jmh745]

Well, now I know for sure my 2 car seats will fit... made my day!

 

[ProSim]

Good pics.... new dad here, I was wondering what this would look like.

That’s even my trim and color ?

Your trim and color of car seat or Bronco? Congrats on the new addition!

 

[Walnut]

rear seat incline looks to be almost straight up, like JK Wrangler backseat. I haven't seen anything that indicates adjustable detents for the angle of back portion.

 

[VelocityBronco]

Looked it up. 65lbs combined weight between kid + seat is the limit. I might need to weigh my seats when I get home...

I hate using the belt. It never cinches down as well as the latch system does.

Look at the side of the car seat or in the manual, mine has weight of kid only for each configuration, I have a 10-in-1 car seat or something crazy like that, its huge, can't wait to downsize or be done with it.

 

[GaryB2220]

Pics and notes per B N

A couple notes and impressions:

• Taller folks might have to move the seat forward a bit if you’re using a child seat in the rear facing configuration.
• If your child is on the larger side or about to move out of needing a booster, you’re probably going to get back of your seat kicked. Pretty common in most vehicles, Bronco isn’t an exception here.
• It’s easiest to go ahead and remove the head rest when installing.
• Usual disclaimers apply here. It’s a pre-production Bronco that may or may not represent the final product that’s delivered tonconsumers

Are there anchor points in the 2 door? Baby due in February

Sponsored