Badlands 33" vs Sasquatch Stance Shots + Suspension Parts Numbers

[Drex]

This is due to wheel offset. Sas has an 8.5" with +30 and badlands has an 8" with +55. I calculated the Sas should have .73" more clearance off of any inside suspension components.

edit: velocitybrew beat me to it with his diagram.

Yeah, but the diagram is wrong, unless people are going to throw away their 285's and go with 275's...

Sponsored

 

[BadSquatch21]

Actually placed a flat edge across the top of the tire to negate any crown and allow a straight measurement to the center of the rim. I then took a measurement from this same flat edge to the edge of the metal fender that is covered by the flare. Added both measurements together. Figured it was the easiest way to get somewhat accurate straight line measurements without removing the wheel.

Nice work. I plan on doing the same Tuesday when I go see the Bronco's. Sounds like your measurements line up close with the 0.4" we thought all along.

 

[BadSquatch21]

Yeah, but the diagram is wrong, unless people are going to throw away their 285's and go with 275's...

Well the wheel portion on the diagram is correct and we were talking wheel offsets and widths.

 

[Werkedperformance]

It does not appear to be a snap style adjustable perch....Appears fixed. The reservoir locations also would compete with moving springs depending on which shock.

 

[Werkedperformance]

 

[Werkedperformance]

Blue tag should be squatch rears. Purple should be non squatch rears

 

[Werkedperformance]

Non sas fronts

 

[Toccoa]

That’s dedication right there. @Administrator this guys deserves a sticker or something.

 

[Werkedperformance]

That’s dedication right there. @Administrator this guys deserves a sticker or something.

The reps werent sure what to think hahaha..... I was like I need part numbers!!!!!!

It was the pictures from inside their "internal" information binder that got me in trouble. She called me a dirty dog and told me no. Also got shut down on pictures of the Nav computer screens.

 

[ZackDanger]

@North7 get in here.

Good info for your thread:

https://www.bronco6g.com/forum/thre...itive-dampers-part-numbers-differences.14939/

 

[Werkedperformance]

@North7 get in here.

Good info for your thread:

https://www.bronco6g.com/forum/thre...itive-dampers-part-numbers-differences.14939/

I got a new phone and its harder to post from it. STEAL AWAY, or i can email you everything i have North7 if you PM me an addy.

 

[Razorbak86]

The reps werent sure what to think hahaha..... I was like I need part numbers!!!!!!

It was the pictures from inside their "internal" information binder that got me in trouble. She called me a dirty dog and told me no. Also got shut down on pictures of the Nav computer screens.

 

[North7]

I got a new phone and its harder to post from it. STEAL AWAY, or i can email you everything i have North7 if you PM me an addy.

Great pics, PM sent.

 

[buzpro]

soooooo will 34's work and fit on a stock bronco without a lift .... i guess the correct size would 33.6 ... would it work or would it have interference ?

 

[Bronco-ocnorB]

My plan is to watch for Sasquatch wheel and tire takeoffs and self-Squatch.

If you were in Texas I would be up for trading you! Looking to do the poor man's Badlands with base mansquatch then moving down to 33s. Will be looking to unload the squatch rims, tires and fender flares!

Sponsored