Baja Designs Lighting Kits Launched For 2021 Bronco

[swooshdave]

There's a drop-down to include toggle switches you install in the cab or just wire to the aux switches. And yes, each set of lights can be switched independently. But it looks like they only include wiring for hooking up to 2 switches, which seems odd to me.
Looks like these are using Delphi Weatherpack connectors as well.
Overall, this seems slightly cheaper than some of the similar kits available for the Raptor, which are usually about $100 more.

I am not a big fan of Weatherpack although they were fine in their day (80s). They are very bulky. I'm starting to dig on the Deutsch connectors.

Sponsored

 

[4avor8ntfair]

This is one that we planned to develop, and are still interested in. We unfortunately have not been able to get our hands on a model that has the bull bar. Once we do, we will almost certainly be developing this kit.

Is a kit planned for the 2x lights show under the bar? It looks like they’re mounted directly to the bumper.

 

[Baja Designs]

I am not a big fan of Weatherpack although they were fine in their day (80s). They are very bulky. I'm starting to dig on the Deutsch connectors.

Non an uncommon stance. We use the Weatherpack connectors due to the very common availability for those people that might need a connector on the fly. The beauty of our MoistureBlock wiring is that you can chop the connector off and put whatever connector you want on the light without worry that you will create an opening for moisture to seep up the cord.

Is a kit planned for the 2x lights show under the bar? It looks like they’re mounted directly to the bumper.

That will be determined once the engineers physically get in front of a bull bar unit. As of now, they have only had digital files for that particular mounting point. If anyone knows of a bull bar equipped vehicle near San Diego, we'd love to get a head start.

 

[4avor8ntfair]

Non an uncommon stance. We use the Weatherpack connectors due to the very common availability for those people that might need a connector on the fly. The beauty of our MoistureBlock wiring is that you can chop the connector off and put whatever connector you want on the light without worry that you will create an opening for moisture to seep up the cord.


That will be determined once the engineers physically get in front of a bull bar unit. As of now, they have only had digital files for that particular mounting point. If anyone knows of a bull bar equipped vehicle near San Diego, we'd love to get a head start.

Sorry, I should have clarified that I’m interested in the two lights but not the bull bars.

 

[2fast4u]

Hoping you guys come out with the Stealth Windshield light bar as well


Stealth Lightbar Video


Light Bar Video

 

[orange_methodology]

Is this the same light kit?

 

[audipwr1]

@Baja - looking at your reverse lights -note they are on "pre order" - timing on the release?

 

[Brongo]

 

[JaceHarp]

Ordered! I wonder which one will arrive first, the Bronco or the lights...

 

[WuNgUn]

Nice...

 

[Bronc-O]

that foglight kit is on my mind.

I like that a lot, but the price OUCH! When I had my Raptor, a similar setup was only around $800.

 

[F OR D]

man, 979 not installed for aux steel bumper is tough. need to make another option, maybe 2-4 lights total. i plan on putting some aux fogs on, would love to use baja, but would never need enough to justify that. fantastic product though, love em!

 

[Ourbroncolife]

Ordered. Starts shipping next month they said.

 

[Dom]

@Baja Designs These fogs look pretty tucked in the corner of the bumper. Is their light pattern cut short due to them being so recessed? Do you guys have a pic of the lights shining on a wall to show the pattern for each set? Or can you show us one?

 

[DANGL3]

Is that an RC lol

Sponsored