- First Name
- Kevin
- Joined
- Apr 11, 2021
- Threads
- 22
- Messages
- 835
- Reaction score
- 845
- Location
- Woodbridge, Virginia
- Vehicle(s)
- 2019 Raptor
- Your Bronco Model
- Badlands
Do you have a link to the ones you used? I'm thinking of doing the same and adding them to all of the Aux wires. Thanks.Great video thank you for posting...I know a lot of time and effort go into making these instructional vids and it is greatly appreciated!
One possible enhancement, and I don't know if you all would consider adding these parts to the light kits but with my Raptor the factory Aux wires are pretty short and if you ever decide to change an accessory to a different switch or have to replace a light and you cut back the factory wire it will get that much shorter or if you instead re-splice and add a second butt connector... less than ideal. Typically the less connections the better. I added weatherpak connections so they are plug / un-plug as needed. You could also use Delphi or other brands...any thoughts?
Yes, I have the specialty crimpers for both Weatherpak and Delphi but you can install them with needle nose pliers.
Sponsored