- Thread starter
- #136
Don't worry, you'll get a new poster out of this. Totally worth it.“Have not notified Ford yet” but yea pls share it on a forum first.
Sponsored
Don't worry, you'll get a new poster out of this. Totally worth it.“Have not notified Ford yet” but yea pls share it on a forum first.
@Ford Motor Company ????
Bad news, folks. This is a MIC 2.0 top built 10/1, delivered 4 days ago.
Top looked excellent at pickup. Did not notice any issues.. 4 days later, I notice I can see the old issue returning. Have not notified Ford yet.
Check your MIC tops CLOSELY on the rearmost panel by the windows. Appears to be pulling apart a bit.
I'll have a lot more photos and any other misc info coming shortly.
BTW, Im happy to delete this and bite the bullet if the forum wants to go that way. Im not in love with the idea of being the reason of another delay.
There is also slight honeycombing.
Im going to use some high strength epoxy with gray pigment to reinforce the edging. My plan is to rub it in the openings all along the edge and then clean it off the visible panel. That should reinforce the edging while sealing out water.
Updated with some photos posted later in thread by @AJ_West_
Admins will hide this thread in the “issues” forum that gets no traffic just like my MIC 2 top post…
And…. It’s already been moved. As soon as this drops off the “most viewed” list no one will find it again. Another one bites the dust…
Looks like you were right
Chances are that a bulletin will be released to dealers to do a magic putty repair anyway. I've seen plenty of band-aid fixes at dealers.I would really refrain from trying to fix/repair these tops yourself with "magic putty". Let the dealer or Ford fix it. If you do they may say YOU screwed it up with a bad fix.
Make it their problem not yours...
New material for Gorilla Glue CommercialYou misunderstood the bronco is not shitty the mic top is what is shitty
My MIC top, built October 7, Delivered October 21, is a beautiful piece of craftsmanship and I've seen no flaws or blemishes in the few days I've had the OBX. I hope your issues not usual, are the odd exception.
Bad news, folks. This is a MIC 2.0 top built 10/1, delivered 4 days ago.
Top looked excellent at pickup. Did not notice any issues.. 4 days later, I notice I can see the old issue returning. Have not notified Ford yet.
Check your MIC tops CLOSELY on the rearmost panel by the windows. Appears to be pulling apart a bit.
I'll have a lot more photos and any other misc info coming shortly.
BTW, Im happy to delete this and bite the bullet if the forum wants to go that way. Im not in love with the idea of being the reason of another delay.
There is also slight honeycombing.
Im going to use some high strength epoxy with gray pigment to reinforce the edging. My plan is to rub it in the openings all along the edge and then clean it off the visible panel. That should reinforce the edging while sealing out water.
Updated with some photos posted later in thread by @AJ_West_
nice try lolGreat I can already see my late 21 build getting cancelled. Let them ship ‘‘em out and fix them later. No one is gunna get their broncos if we keep doing this crap lol. I’m not justifying the poor quality but as a 2 door order I want my damn bronco. Plus it will cost ford more in the end to ship tops after all the deliveries…let’s really stick it to them and let them
Ship a bunch before they have to fix them! Who’s with me!
even worse when you can't stand those dudes to begin with.This stupid meme is so over played. Really. Snore.