ARCHETYPE RACING | BAM-BYODR (Billet Aluminum Modular Bring Your Own Device Rail)

[Dragline]

Looks great!

Are we still supposed to wait for you to add us to post #2? Did my SEND IT! post last week...

Sponsored

 

[Smheard]

We FINALLY had a chance to get the rails mounted up in a Bronco for pictures and all I can say is it does not disappoint! Our local dealer shot me a text that there was a 2 door OBX demo that was just delivered and we can get our hands on it. That was at 4 PM. We were there with keys in our hands at 5 PM. Yeah, it was dark by then, but adapt and overcome.

Right off the bat, WOW, the fitment is spot on. The rails sit just above the dash and will easily allow for rail mount adapters to fit and still be low profile. Which means your devices will sit as low as possible. The rails are easily visible through the windshield for that extra flex on those that are the have nots in the Bronco world. The tumbled matte clear and Tech Bronze finishes will absolutely pop off the dash. I took a couple pics from a passenger/driver point of view. The BAM definitely has a presence. It’s not one of those things you install and overlook. That’s for sure.

The rails are off to anodizing now. Once they are wrapped up, they’ll be shipped to me for final inspection, prep for shipping, and will be headed out our doors to all of you! As soon as I have them back from anodizing, we can get much more firm dates for shipping.

All I can say is, not too shabby for a 100% virtual development part and rapid production. Being a smaller company, decisions get made much faster and work can still be literally ram rodded with zero yellow tape to cut. You literally watched it all unfold right here. Everything from saying we’ll make the rail to getting a production part installed on a vehicle. I sincerely thank all of you for the support.

And as #13 on your page 1 list this makes me happy….

 

[HL_MI_BRONCO]

BRAVO

spectacular job @EIGHTLUG

 

[HL_MI_BRONCO]

Going to need to track down black hardware!
Can't wait to see the billet inset for the dash, it's going to be backwards compatible to the rail?

Mg

100% agreed. Would really love black hardware option.

 

[BroncoBuckaroo]

Best laid plans…

I had 3/5ths of the parts. I just needed the feet to get machined and anodized before my buddy had to leave his shop to run his booth. They were a day late then it was just dominoes from there. I have all of the parts now. I’ll head to my local dealer and use their demo Bronco for pics.

dang..those are just outstanding! Five Stars

 

[Hossamus Prime]

We FINALLY had a chance to get the rails mounted up in a Bronco for pictures and all I can say is it does not disappoint! Our local dealer shot me a text that there was a 2 door OBX demo that was just delivered and we can get our hands on it. That was at 4 PM. We were there with keys in our hands at 5 PM. Yeah, it was dark by then, but adapt and overcome.

Right off the bat, WOW, the fitment is spot on. The rails sit just above the dash and will easily allow for rail mount adapters to fit and still be low profile. Which means your devices will sit as low as possible. The rails are easily visible through the windshield for that extra flex on those that are the have nots in the Bronco world. The tumbled matte clear and Tech Bronze finishes will absolutely pop off the dash. I took a couple pics from a passenger/driver point of view. The BAM definitely has a presence. It’s not one of those things you install and overlook. That’s for sure.

The rails are off to anodizing now. Once they are wrapped up, they’ll be shipped to me for final inspection, prep for shipping, and will be headed out our doors to all of you! As soon as I have them back from anodizing, we can get much more firm dates for shipping.

All I can say is, not too shabby for a 100% virtual development part and rapid production. Being a smaller company, decisions get made much faster and work can still be literally ram rodded with zero yellow tape to cut. You literally watched it all unfold right here. Everything from saying we’ll make the rail to getting a production part installed on a vehicle. I sincerely thank all of you for the support.

Can’t wait To install mine!

 

[Daktari]

these look really great, amazing work!

 

[R_R8T3D]

Send IT!

 

[EIGHTLUG]

100% agreed. Would really love black hardware option.

If I can get a concencus on black hardware for black rails, I'll just make black the standard.

Add your thoughts below.

 

[Dragline]

+1 black on black

 

[Smheard]

If I can get a concencus on black hardware for black rails, I'll just make black the standard.

Add your thoughts below.

….you never go back! I’m good for black.

 

[BRKOBILLY2]

If I can get a consensus on black hardware for black rails, I'll just make black the standard.

Add your thoughts below.

I don't have my bronco yet, so do they have silver hardware on grab handles or other items? If so then silver works. But if you told me black is only option I would not complain.

 

[Biltwild]

 

[bmclain]

I don't have my bronco yet, so do they have silver hardware on grab handles or other items? If so then silver works. But if you told me black is only option I would not complain.

Grab handle screws are silver. I'm ok with either. Black and black would give it a cool stealth look, but silver would match the accents in the bronco.

 

[Dragline]

Imagine the sun catching one of those shiny silver screws just right and suddenly you get an ant incinerating laser beam to the eye.

Just sayin.

Sponsored