Recent content by CG2DOOR

I didn’t change anything else. I had the modular bumper which is fairly heavy anyway. I didn’t measure but I don’t see any difference in the front height and no difference in handling on the highway.

Approach angle now is about 38 degrees so it’s come down a little but still really good.

I installed a Stubby from Fab Fours on my Bronco, it has very little tolerance for a winch. Smittybilt X20 will not fit and Warn EVO doesn’t fit the pre drilled holes. I had to drill my own holes but the winch rubs slightly on the grille.Looks like it may only fit the Zeon without modifying.

It is the window re learn procedure from the Bronco shop manual.

runs are correctly installed and free of foreign material. Start the engine. Press and hold the window control switch until the door window is fully open. Release the window control switch. Lift and hold the window control switch until the door window is fully closed. Release the window...

There is an SSM from Ford on the 2.3 for a brake issue. 50314 - 2021 Bronco - 2.3L - Illuminated Brake Warning Lamp And/Or Brake System Warning Some 2021 Bronco vehicles equipped with the 2.3L engine may exhibit a red brake warning lamp and/or brake system warning message in the instrument panel...

Mine was released from Dirt Mountain at the end of October after 3 months of captivity. Another team 2 door.

Looks amazing, nice build.

Looks like an awesome trip!!This might help with the no key detected issue. Intermittent No Key Detected Fault Message Displayed In The Instrument Cluster - Built On Or Before 09-Jul-2021 21-2251 30 July 2021 Model: Ford 2021 Bronco Issue: Some 2021 Bronco vehicles built on or...

Been following this thread since the beginning so I thought I should post some pics. 7/22 blend released from Dirt Mountain 10/18, arrived at the dealer 10/21.

Send it.