Recent content by CWGrisw0ld

I've only had it in for 3 months or so, but I have 2 40 amp fuses on switches 1 and 2 and......so far so good.

I did something similar to Dan, but instead of the MLC, I mounted this $30 Amazon box on top of the fuse box cover. https://www.amazon.com/dp/B0DKJ7JW99?ref_=ppx_hzsearch_conn_dt_b_fed_asin_title_2&th=1

I did the closeout procomp coil overs, trackbar, and UCAs combined with the JKS max tire clearance kit and the rockjock trackbar relocation bracket. It didn’t break the bank, there’s plenty of room in the wheel wells, and barely altered ride quality.

You are almost correct - Wires 4-6 are 0.35mm which is about 20-22AWG, wire 3 is 0.75mm which is about 18-19AWG, and wires 1-2 are 1.5mm which is about 15-16AWG. SO based on the Diode Dynamics recs, you could only use AUX 1 or 2 for those lights. So what do you do? You really only have 3...

Got the same message. Sorry, was hoping to help somebody out.

Lethal Performance custom sill guards

Good idea. I'll give that a shot!

I did the footwells and cup holder a couple weeks ago. For anyone considering this mod, I would advise against doing the cup holders. A previous poster said the fit with the LED cup holder was 97%. I’d call it 85%. In my picture, you can see how the central cup separator area doesn’t line up...

I placed my initial order in late January and it came in a couple weeks later. I only just managed to get around to the install. I accidentally placed a second order on 2/11 (because Ford never sent me a confirmation for my 1st order) and that one still hasn’t arrived. I imagine anything placed...

Bought mine directly from Ford

Put mine on today. I highly recommend the amazon thread chaser kit posted earlier in the thread. Be sure to run it through your hinges 6-8 times. I initially only chased the threads a couple of times and the bolts still tried to strip. i used the one hinge at a time method and supported the...

I'll find out for you - conversely, I will be in Galveston this month and Conroe in April

Lowered price

4x4TruckLeds can likely set you up with a reverse harness with upfitter switch control - just send a message