Wife and I both disliked the big step into our Sasquatch with factory Black Diamond rockslides. Since we do some true off road driving we felt we needed some protection to the pinch weld area. We have also seen the damage that occurs when a side step hits something and bends that area.
Our...
A Roadside Assistance program through a paid subscription is one possibility.
Our SAS has Mickey Thompson tires with some of the stronger sidewalls on an E rated tire. Not ideal but I think I could drive a some distance but not for miles. For self help You could explore something like...
We have a charge line attached to our hook up system. It is in the same cable as the brake and turn signal cable. We have had the Bronco in Flat tow for up to 3 days without disconnection.
It has never drained the battery.
Thank you.
That is what I did the first time...took a so wire brush to it and it looked new.
Getting ready to change diffs and really questioned it.
EDIT: You are a good guy also!!! I trust what you post.
Way back when, Flip posted a service guide showing that Ford specs that the differential drain plugs and the fill plus are One Time Use. Take them out and toss in the trash....install new ones.
That was from a post back in 2021... I trust what Flip posts...he is a good guy on this website...
If you have Wildpeak AT 4W tires, how good or bad are they for being balanced? Do the stay balanced?
Any experience comparing this issue with BF Goodrich KO3 tires?
Watched a video and at 47-48 mph it dropped down approximately 4 to 5 inches. One video stated that Ford claims a 4% improvement.......but does not state what that improvement is. I suppose a wind tunnel might show the drag affects of wind getting under the truck.
Even without the "active...
I know there is a F150 forum somewhere in the internet, but I also find mostly good advice here.
Since I am a Bronco owner, maybe I can ask a question about a F150???
2025 F150 with 3.5 Ecoboost....not the hybrid version. If I remove the active air dam in order to install a front skid plate...