Recent content by luvtofish

They had it two weeks. Not sure about the rental, I didn’t need one so didn’t ask them for one.

Yes, that is the method prescribed by Ford. The mechanic that worked on mine did not do this however. He dismantled the grille, fenders, etc and performed the work that way. 10k miles later and running great.

Yes. They told me it’s safe to drive while waiting on parts to repair. I put 1500 miles on while awaiting parts.

Mine is all done. No more rattle! It took them 4 days to complete the fix. I haven't noticed any differences in engine performance or anything. Just glad the rattle is gone.

Parts for mine took 3 weeks to get in. My bronco goes in Monday for the repair.

I’d say yes you could modify them to do this. It would require hacking the harness in half and running all new wires to both powered Aux switches. A lot of work but doable.

No, they do not use the built in light switch. That switch is on the CANBUS circuit which these light do not tap in too. many that have the overhead upfitter switches, tie in to the aux6 switch in order to have the ability to turn the lights on and off at will. No idea if they plan on...

Welp the wifey had a thing or two to say about the dome lights and door activation. She said “we’re only getting older and will need the lights on when the door opens”. So, not wanting to get on the wrong side of the misses, I decided to dive back in and find the correct gray/purple wire called...

I’d say no, coincidental yes. The cam phasers are becoming a known issue with the 2.7 just likes it’s big brother the 3.5.

Mine doesn’t have to go that long. It will do it within 2 hrs. Dealer called me other day. The parts are in and my Bronco goes in for the repair on 3/13. They expect it to take all week as the engine has to be pulled to perform the repair. I’m a little nervous because this their first Bronco...

IAG called me in the meantime. And yep, the wire I tapped into apparently has a brown stripe which with my lighting in that tite spot looked purple. IAG even said it’s really easy to confuse that wire with the correct one. I believe the correct wire is more of a light gray and yes, as stated...

Hi all, I’ve ran into an issue with the installation and was curious if anyone else ran into this problem. When tapping in to the power source for the lights, the instructions state to connect to the gray wire with purple stripe in the wire harness near the fuse box. Well, I’ve done this and the...

I’m still waiting on dealer to call me back. They ordered parts 3.5 weeks ago.

I did one at 1100 miles. The noise started around 7k miles. I performed a second oil change and it didn’t eliminate the noise.

I’m thinking this is way to loud and pronounced to be the waste gate linkage. I watched some videos of that on YouTube.