Sponsored

Recent content by ngwildtrak

  1. Adding a factory replacement sway bar disconnect to a wildtrak

    No problem!

  2. Adding a factory replacement sway bar disconnect to a wildtrak

  3. Adding a factory replacement sway bar disconnect to a wildtrak

    Here is the communication network it shows to use. It is labeled FD1 instead of high or medium speed can. The pinout for the hero switch labels the com as high speed though so I'm not sure id they are the same or sepetate??? I wish we had someone that had worked on these systems that could shed...

  4. Adding a factory replacement sway bar disconnect to a wildtrak

    Here is the plug in for the HERO switches, they all have the same one and same number of wires from the ones I have pulled and checked

  5. Adding a factory replacement sway bar disconnect to a wildtrak

    I'm not sure the exact voltage operating the solenoids that allow this to release.

  6. Adding a factory replacement sway bar disconnect to a wildtrak

    The CAN system operates on roughly 1.5-3.5 v.

  7. Adding a factory replacement sway bar disconnect to a wildtrak

    I have been working on this in theory since going to the Bronco Off-Roadeo last summer and seeing how handy this was. I had time since mine rolled to a 23 so I started putting a part list together and seeing what changes I could make with Forscan. I work at a dealership so I have the luxury of...

  8. Adding a factory replacement sway bar disconnect to a wildtrak

    I believe this will be able to be accomplished with as built line modification.

  9. Adding a factory replacement sway bar disconnect to a wildtrak

    From what digging I have done the HERO switch operates on the CAN network and would not be usable. I am currently in development of a standalone harness that would be plug and play with our units. We would add the chassis control module either under hood or in cab and add the relay and fuse...

  10. Adding a factory replacement sway bar disconnect to a wildtrak

    I have been tinkering with this for weeks off and on. The HERO switches on the dash are easy and swap right in. Programming is another story, the disconnect needs a harness to connect to it for operation, the Badlands, Raptor and First Edition are the only ones with the connectors to make it...

  11. Adding a factory replacement sway bar disconnect to a wildtrak

    Did he do it with all factory components and do you happen to know how he addressed the wiring?

  12. Adding a factory replacement sway bar disconnect to a wildtrak

    Has anyone made any progress on this, I have a parts list running currently but an running into an issue with the wiring harness. there is an additional plug on the badlands c1416 that provides the signals to the stabilizer bar. There is a chassis control module in the rear of these vehicles as...
See more


Top