Recent content by Pmharris423

Would you recommend the 6.5’s in the rear? I’ve been loving the bi amp setup up front but just wondered if a larger full range speaker would give some extra rear fill to the sound.

I’ve got the harness modified like you’ve laid out, I’m getting stock HU sound from the rear pods. I changed the dash speakers before I had attempted any of this and they were working before. On Pg 9 #135 he says he installed connectors that looped and it restored signal to the dash. I forgot...

What did you do with the old kick panel connections? Right now mine are empty and I’ve got no output to the dash. I’ve order some connectors and will loop them to continue the signal up to the dash. Kick panels are on my own wires like you outline. I’m assuming the pnp harness I have is tapping...

Thanks for this advice, I did, was easy enough to run along the signal cable. I haven’t been able to run the auto-eq unfortunately. Everytime I start it I get a sad beep followed by 2 beeps right after. I think it has to do with the subwoofer. I disconnected the power to it and got no sound out...

It is the Plugnplaykits 19-1 that Ragnarkon used in his install. Here is a picture showing the signal wire running to the amp in the back Edit: After looking at your picture on page 7 #99 I see these are in addition to what you have on the plug, and I shouldn't have any difference than your setup.

Very happy to find this thread as I’m about to start on my own upgrade. I’m planning on doing this, but I have a caveat that I wanted to run by y’all. I have the kit 19-1 that includes a subwoofer signal cable, I don’t have it yet but I assume it will be tapped into the AMP1 line that is going...