Recent content by retiredarmymp

In the harbor freight boxes is the compressor, the safe jack and the tool kit. In the black boxes on the shelf is a jump starter, an endoscope, an electronic torque wrench and fuses, and in the Roto-Pax boxes in the attic is a first aid kit and then various tools and items in the black one.

A little bit of everything, GMRS MXT 575 and handheld radios, Wolf box, front and rear dash cams, blue, Eddie, power station, collapsible, solar panel, 12 V refrigerator, endoscope, code, reader, extra fuses, blankets, rein gear,tie rod ends, small shovel, first aid kits, splint kits, jump box...

I carry 2 standard automotive fire extinguishers attached to the rear roll bars, an Element attached to the overhead molle panel and a fire blanket.

When I showed the pics and videos of my most recent trip to Moab to my service advisor at the Ford dealership where I purchased, and have my Bronco serviced, he said I’m the only Bronco owner, at his dealership, he is aware of that uses their Bronco for what it was designed for. I was surprised...

Everything about that trailer is awesome except the tires lol if it was mine, I would have to install a wider axle and bigger tires that would make it a lot more off-road capable and probably tow a lot better on highways.

I made a Velcro strap that goes around the BLUETTI and the bottom/side of the shelf, and a block system to keep the BLUETTI from sliding around when off-roading.

Portable so I can move it to other vehicles. I went with the Amazon ARB twin knockoff and mounted it in a harbor freight box, it has been working great and it was less than 1/3 the price of the twin portable compressor from ARB. I also have a 4 tire inflation hose but I don’t use it because it...

I didn’t want on board air so I could move it to other vehicles when necessary. I purchased the Amazon ARB twin knock off and mounted it in a harbor. Freight box, works great.

You can also check out JCR Off-road, they make the Molly panels that attach differently and not to the hard top mounting bolts. You really can’t see the Molly panels in the pictures, but the shelf attaches to them.

I hated that silver ring on the center caps also. I went with the decal with a white bronco because it better goes with my theme.

I would say the more the merrier. If possible, keep the two down the sides have two down the center about 5 inches apart and then one going side to side in the front and one going side to side in the rear, would be my recommendation.

I love the TrailDeck, but I feel in the next version new tiedown anchor points need to be developed. I had to add my own to keep the items from moving around especially when off-roading.

On an overhead molle panel (you can see the gray double-sided tape through the molle. Seems to work fine through the roof.

RokBloks XL long will work great and they are easily removable for offloading if in an area with large rocks and steps or drop offs. They are more expensive than most come with metal mounting brackets that are extremely sturdy. I’ve had mine for four years and the only problem is some of the...