Sponsored
rugedraw's latest activity
-
rugedraw replied to the thread Adaptive cruise and crash front sensor removal.Oh, and you may also have to dig through this section of the ABS to disable cruise control with ACC. If you disable it in the IPMA only... -
-
rugedraw replied to the thread Adaptive cruise and crash front sensor removal.I think you would need to disable ACC and TJA here in the IPMA: There is no info in the Bronco or Raptor spreadsheet for the CCM...
-
-
rugedraw replied to the thread Adaptive cruise and crash front sensor removal.What year is your Bronco? Edit: Never mind.....I don't think the year matters on these trucks. I'll see what I can find.
-
Not really trusting any MFG at this point. Mostly minor issues with my Ram. Wife has a 2019 Expedition that had to have cam phasers...
-
rugedraw reacted to Wichadicha's post in the thread Recall software update wiped out my GOAT Modes with
Like.
Thanks Ducati1098 - not sure if the ABS update was applied but this sound like exactly what's going on. I have FDRS so I'll jump on this... -
I always lease to get the write offs and derisk getting a POS and use free capital to earn far more than would be saved by avoiding...
-
rugedraw replied to the thread Lease questions.For a lease, you always negotiate the payment. Just like in finance deals, there is interest involved in a lease. However, the lease...
-
rugedraw reacted to Ducati1098's post in the thread Recall software update wiped out my GOAT Modes with Like.
Don't know if you've had this fixed or not yet, but Ford just released this:
-
rugedraw replied to the thread Recall software update wiped out my GOAT Modes.There is one reason and one reason only this would happen, and that is the update wiped the configuration for the drive modes you are...
-
Detonation and pinging. Possible engine damage and no more warranty.
-
rugedraw reacted to PowerBronco's post in the thread Recall software update wiped out my GOAT Modes with Like.
Can you use Forscan and re-add the missing modes? It might be the path of least resistance.
-
rugedraw replied to the thread Bronco will not start.Based on the "OTA reset" procedure they are describing, it sounds like the vehicle got stuck in inhibit mode during the OTA install...
-
rugedraw replied to the thread Adaptive Cruise control with traffic jam monitoring.You're right....it does have it enabled. I don't drive it enough to have ever tried to use it. Good.....one less rabbit hole to fall...
-
rugedraw reacted to TrailDamage's post in the thread Adaptive Cruise control with traffic jam monitoring with Like.
If she has adaptive cruise it’ll already have stop and go (TJA) enabled. I enabled it on my Bronco a long time ago it works well. I need...
-
rugedraw replied to the thread Adaptive Cruise control with traffic jam monitoring.Ah ok. I know how to enable it on vehicles with just an IPMA, but not sure on these. Interesting that the video posted requires a BCM...
-
rugedraw reacted to Ducati1098's post in the thread Adaptive Cruise control with traffic jam monitoring with Like.
They're still using the same combo. I'm pretty sure none of the full size broncos actually do stop and go ACC, which is why I'm confused...
-
rugedraw replied to the thread Adaptive Cruise control with traffic jam monitoring.Are the 2025/2026 Broncos still using an IPMA/IPMB combo or did they switch to IPMA only yet?
-
rugedraw reacted to brkdncr's post in the thread Adaptive Cruise control with traffic jam monitoring with Like.
probably cuts out around 8mph right? it’s adaptive at speed, but not stop and go. Forscan enabled stop and go on mine though and is...
-
rugedraw replied to the thread Software Updates will not turn on.This is a known issue as of about a year ago after a certain GWM update. The GWM is hung up. The only way to fix it is to disconnect the...
-
rugedraw reacted to RoverDude's post in the thread Driver seat connector (C331) pin out 2026 with Like.
Much appreciated!
-
rugedraw replied to the thread Driver seat connector (C331) pin out 2026.Here you go.
-
rugedraw replied to the thread 2026 swap to signature headlights not working..Owners should consider themselves lucky. TRON is a huge PITA to deal with if you like to tinker with your vehicle.
-
rugedraw replied to the thread 2026 swap to signature headlights not working..Really? In that case, throw that theory out the window. :ROFLMAO:
-
rugedraw replied to the thread 2026 swap to signature headlights not working..Edit: TRON has not been added to the full-size Bronco yet......nothing I wrote below is applicable in this case. The problem is TRON...
-
-
rugedraw reacted to Ducati1098's post in the thread 2026 swap to signature headlights not working. with Like.
Headlights aren't VIN locked. They likely just need to perform the headlight LIN module Initialization procedure in FDRS.
-
rugedraw replied to the thread New Software Update 10.1.1?.Yes, the OTA you got in January was 10.1.0 which is also an APIM update that precedes the TCU update you just got. Certain modules (GWM...
-
rugedraw replied to the thread New Software Update 10.1.1?.That is an old TCU (modem) update first reported in September of 2024. @GoHawks63 APIM update SYNC-25.2.1.6.5.2 will be the next one...
-
-
rugedraw reacted to Ducati1098's post in the thread 2025 Full Digital Cluster successfully installed - swapped into 2022 Wildtrak with Like.
Does look very close, but I don’t think it’s the same. Not sure it would fit/mount correctly either.
-
rugedraw reacted to Alfa's post in the thread 2025 Full Digital Cluster successfully installed - swapped into 2022 Wildtrak with Like.
Thanks.
-
rugedraw replied to the thread 2025 Full Digital Cluster successfully installed - swapped into 2022 Wildtrak.They can be obtained with FDRS.
-
rugedraw replied to the thread 2025 Full Digital Cluster successfully installed - swapped into 2022 Wildtrak.I'll see what the software strategy is on it so it can be compared to what you guys have on these, but that part does not concern me. If...
-
rugedraw replied to the thread 2025 Full Digital Cluster successfully installed - swapped into 2022 Wildtrak.I've been following this thread since it started and this picture just made me notice something. I am in the process of trying to do...
-
-
rugedraw reacted to Alfa's post in the thread 2025 Full Digital Cluster successfully installed - swapped into 2022 Wildtrak with Like.
The kilometers per hour thing had nothing to do with Forscan. There is an additional setting in the display (using the on screen menu)...
-
rugedraw reacted to orion's post in the thread Software Updates when NOT set to receive automatically with Like.
Dude, your awesome! I may or may not need your services in the future! 🍻
-
rugedraw replied to the thread Dealer flummoxed-what's next?.@MJBbase22 If your Ford app is connected, message me the VIN so I can pull the codes.
-
rugedraw replied to the thread Software Updates when NOT set to receive automatically.Not sure if I've mentioned it on this forum or not, but I have 4 Mongoose cables I loan out for free to anyone that needs one. Details...
-
rugedraw reacted to Brian_B's post in the thread Software Updates when NOT set to receive automatically with Like.
Updates can be installed via FDRS as well - a pricey way to do it unless you either work at a dealer, know a guy, or talk your dealer...
-
rugedraw replied to the thread Software Updates when NOT set to receive automatically.In the case of the touchscreen, you won't have to check it. It will pop up every time you start the vehicle. This will happen for 14...
-
rugedraw replied to the thread Software Updates when NOT set to receive automatically.Having auto-updates on or off makes no difference in terms of how often you will get updates. If you have updates set to off and they...
-
-
rugedraw reacted to Cobrafang's post in the thread 2025 Full Digital Cluster successfully installed - swapped into 2022 Wildtrak with Like.
@Alfa The only thing I would add is that if you have used forscan before and have a vehicle profile...do not load it again. This is the...
-
rugedraw replied to the thread 2025 Full Digital Cluster successfully installed - swapped into 2022 Wildtrak.Yea, you can just back up the ab on your current IPC, or hit "write all" when you put the new IPC in and it will pull the ab from Ford...
-
rugedraw replied to the thread 2025 Full Digital Cluster successfully installed - swapped into 2022 Wildtrak.The actual firmware on all the 2025 IPC's are the same. The only thing that changes from vehicle to vehicle is the config.
-
rugedraw reacted to Cobrafang's post in the thread 2025 Full Digital Cluster successfully installed - swapped into 2022 Wildtrak with Like.
Ok so the fault on the generator miss match (P106B DTC) was a result of trying to get the seat belt monitor to no longer pop up and...
-
rugedraw reacted to Cobrafang's post in the thread 2025 Full Digital Cluster successfully installed - swapped into 2022 Wildtrak with Like.
Before I get everyone spun up. I am going to do some tests. I am going to reload the AS built to the IPC for the 2025 Strope Bronco...
-
I went the other direction and bought a new chainsaw - which being an idiot, I'll likely run without hearing protection - which will...
-
Long story short: Got my tax refund, looking to upgrade my amp to a DSP amp. So far considering Musway M6Pro + something for sub...
-
rugedraw reacted to zuke's post in the thread 2025 Full Digital Cluster successfully installed - swapped into 2022 Wildtrak with Like.
Did you do a PCM relearn yet? Sounds like you have a config mismatch betweem the IPC and PCM
-
rugedraw reacted to Cobrafang's post in the thread 2025 Full Digital Cluster successfully installed - swapped into 2022 Wildtrak with Like.
I can say that I just set the codes for everything enabled in rugedraw's post...so use 'F' for the changed digit. My cruise control...
-
rugedraw replied to the thread 2025 Full Digital Cluster successfully installed - swapped into 2022 Wildtrak.Which module is reporting the code? What exactly did you change and what was there before you changed it?
