Recent content by WheresMyBronco

The tape shouldn't be an issue but it's still possible for parts of it to rub against your paint and cause wear. I've had good luck applying PPF on the paint before installing stuff like that

The problem is you can't do the window reset when this is happening because the window bounces back down as you're holding the switch up. In the past I had to just leave my window up (manually inching it towards the top without it bouncing down) and then I'd leave it alone for a day or two...

Yeah. Might take me a day or two to pack/ship it but I'll DM you

San fernando valley/Northridge. Also, I think I bought my trunk liner from you a couple years ago

Hi, Sold my Bronco (don't wanna talk about it 😔) so I'm getting rid of all of the accessories I had. Located in Los Angeles. Let me know if you have any questions about any of the items. If it's still on the list it's still available. (Update: all sold)

Shine a flashlight or let the sun hit your paint and you'll probably notice a ton of swirl marks. Might not be as noticeable on some colors like your Robin Blue but they'll be there

I agree, the windows are terrible. They wobble and feel cheap, need resetting all the time, and there have been 2-3 occasions where one of my windows fully rolled down when the car was fully parked in my driveway/at work. Worst thing about the Bronco IMO

Does it stretch long enough to connect to the inside roll bars to use for trunk/interior lighting? Can't tell if it's a fixed length or not Always wanted to try doing that, might pick this one up if it'll reach

You have the same exact model as me, and I felt it made a noticeable difference on mine. You can probably get away with other suppliers as long as the specs/dimensions are similar

Would you be able to help look up the codes on my bronco as well if I send you my VIN? I took mine in for a repair at the dealer and they're saying they can't replicate the issue or fix it without a code, so I'm hoping this will help Thanks in advance

Here's the product page for it: https://www.mcmaster.com/product/93085K556 1/2" wide, 1/2" height, 1/4" ID, EPDM closed cell foam

Interesting, looks like trim rattle prevention. Might have to stick a piece of foam in there on mine to see if it helps when I'm blasting music

I recall seeing a couple members on here try them out a few years ago. If I recall correctly, I think they had to slightly modify some of the sensor mounting points, but everything worked out fine in the end. I'd recommend getting a takeoff mod bumper from marketplace instead if possible

Have any details on how you did the swap?

I call dibs on Sum Ting Wong!