- Thread starter
- #1
2"lift with 33' any photos?
Wondering if 2" lift with 33 will look good?
Have non sasquatch Black diamond
Thank you
Wondering if 2" lift with 33 will look good?
Have non sasquatch Black diamond
Thank you
Sponsored
Looks good! What warranty were you trying to keep?So I decided to not go with 33's. I went with a 2" lift from 4 Wheel Parts, and found OEM Sasquatch wheels, tires and sensors.
FYI: OEM Sasquatch Wheels and Tires where $1800.00
Driving to Kentucky from Ohio $200.00
Lift and install was $540.00
Lift included with new crash bars $388.79
Rough Country Spare tire extension: $26.57
So my total was : $ 2,955.36
I installed tires, the TPMS auto detects for tire pressure.
Used forscan to set wheel circumference. I check wife's she has a Wildtrack. Used that number which was 2653. see below. Sasquatch tires can be inflated 10psi more than what it says max is.
It's on the tire right above max psi which is 35psi
I would have done the install on the lift, but I wanted there warranty because the bronco was so new.
4 Wheel Parts warranty, I do believe they are a Ford authorized installer of after market parts.Looks good! What warranty were you trying to keep?
This is exactly what I wanted to see. I had the same question about 33s and a 2 inch lift. This looks great!Here is a 3 inch with 33s. This is Eibach's upcoming Pro Truck lift system. It used a height adjustable coil essentially thr same as the stick basic suspension. It has better valving, better spring rate, and rides better than stock. It is firmer without being harsh. We will be selling them as soon as they are available at my buddy's site. I'll DM you info and discount code if you're interested, since I'm not a vendor on the site. The rest of eibachs kits that are comparable to these are around 700 bux Street price. I'd expect these to be similar. That's for all 4 corners.
I also have a non sasquatch black diamond, although mine is a 2 door. The suspension is set just below 3 inches.
Before with factory suspsenion):
After (how it currently sits):
Looks good. Thinking about adding a 2” lift to my badlands…. keeping the 33”tires until I need new tires. could wait to do the lift when I need new tires… but waiting sucks.Here is a 3 inch with 33s. This is Eibach's upcoming Pro Truck lift system. It used a height adjustable coil essentially thr same as the stick basic suspension. It has better valving, better spring rate, and rides better than stock. It is firmer without being harsh. We will be selling them as soon as they are available at my buddy's site. I'll DM you info and discount code if you're interested, since I'm not a vendor on the site. The rest of eibachs kits that are comparable to these are around 700 bux Street price. I'd expect these to be similar. That's for all 4 corners.
I also have a non sasquatch black diamond, although mine is a 2 door. The suspension is set just below 3 inches.
Before with factory suspsenion):
After (how it currently sits):
No it looks fine. The original stage 1 setup was probably closer to 2 inch lift. It's now close to 3 inches. Pic belowLooks good. Thinking about adding a 2” lift to my badlands…. keeping the 33”tires until I need new tires. could wait to do the lift when I need new tires… but waiting sucks.
do the 33s looks awkwardly small in real life with the lift? I think the pics look good, but just wondering what kind of feedback you’ve received.
Also have you noticed a decline in the comfort of the day to day rode
Thanks for asking this. This is what i was thinking of doing. I think it looks good personally. I like to see a little more gap between tire and fender myself2"lift with 33' any photos?
Wondering if 2" lift with 33 will look good?
Have non sasquatch Black diamond
Thank you
This looks perfect!Here is a 3 inch with 33s. This is Eibach's upcoming Pro Truck lift system. It used a height adjustable coil essentially thr same as the stick basic suspension. It has better valving, better spring rate, and rides better than stock. It is firmer without being harsh. We will be selling them as soon as they are available at my buddy's site. I'll DM you info and discount code if you're interested, since I'm not a vendor on the site. The rest of eibachs kits that are comparable to these are around 700 bux Street price. I'd expect these to be similar. That's for all 4 corners.
I also have a non sasquatch black diamond, although mine is a 2 door. The suspension is set just below 3 inches.
Before with factory suspsenion):
After (how it currently sits):
That looks dope tbh. Hows that suspension treating you? looks pretty decent for the price.point.Here is a 3 inch with 33s. This is Eibach's upcoming Pro Truck lift system. It used a height adjustable coil essentially thr same as the stick basic suspension. It has better valving, better spring rate, and rides better than stock. It is firmer without being harsh. We will be selling them as soon as they are available at my buddy's site. I'll DM you info and discount code if you're interested, since I'm not a vendor on the site. The rest of eibachs kits that are comparable to these are around 700 bux Street price. I'd expect these to be similar. That's for all 4 corners.
I also have a non sasquatch black diamond, although mine is a 2 door. The suspension is set just below 3 inches.
Before with factory suspsenion):
After (how it currently sits):