Show 33's some love picture thread

[FrostedNuts]

FYI: Current state of affairs, since someone sideswiped me (and ran) in a parking lot, and had to have the passenger door fixed and repainted, waiting on a replacement graphic...

Sponsored

 

[CanuckBronco]

285 70 17 BFG K02 on Method wheels

Love those wheels! Did you get a lift or a levelling kit installed?

 

[CanuckBronco]

No lift. 285/17 KO2's. Fuel Coverts are zero offset. I've bashed the bash plates underneath quite a bit. So far, the long pedal is getting me over the boulders.

Love it! So no lift or levelling kit?

 

[TxBronc]

Just stock Badlands optional wheels.. This is actually in a mall parking lot But it's an ex-mall.

Love these 33s!
I remember when 33/12.50/15s were "huge" tires. We ran them on everything from Jeeps to 1/2ton trucks! They were extremely capable to tackle anything off-road. Now it's 37s!

these 33 12.5 15’s

 

[mountainbronco]

Love those wheels! Did you get a lift or a levelling kit installed?

No lift or level, and i don't regret sticking with stock. Only thing I did was replace crash bars with low profile, as i had a very slight rub at full turn. (Due to offset on these rims)
I agree with you, they look really good with cyber orange, their black trims help blend with black fenders.

 

[WarthogJr]

Love it! So no lift or levelling kit?

When that picture was taken, no lift of any kind.

 

[CanuckBronco]

When that picture was taken, no lift of any kind.

Sweet. Did you experience any rubbing or remove the crash bars,?

 

[CanuckBronco]

No lift or level, and i don't regret sticking with stock. Only thing I did was replace crash bars with low profile, as i had a very slight rub at full turn. (Due to offset on these rims)
I agree with you, they look really good with cyber orange, their black trims help blend with black fenders.

Cool. By low profile you’re referring to a low profile set of new crash bars? Or.. I’m not sure I understood.

 

[CanuckBronco]

Here is mine:

275/70/18 +30 offset

Here is the poke for +30

Hey it looks amazing! Did you have to remove crash bars? Add a lift kit or experience any rubbing?

 

[CanuckBronco]

Stock Badlands Wheels powder coated.

Looks quite nice are you experiencing any rubbing? Did you get a lift?

 

[fuesting]

Looks quite nice are you experiencing any rubbing? Did you get a lift?

Hi. It's a completely stock vehicle from a suspension standpoint. No rubbing. I'm very happy with it. I think darker wheels combined with shadows and the dark fender flares trick the eye into thinking its got more lift.

 

[CanuckBronco]

Hi. It's a completely stock vehicle from a suspension standpoint. No rubbing. I'm very happy with it. I think darker wheels combined with shadows and the dark fender flares trick the eye into thinking its got more lift.

That’s awesome! No rubbing, I guess that also means you kept the safety bars?

 

[WarthogJr]

Sweet. Did you experience any rubbing or remove the crash bars,?

At full lock left, the left tire barely touched the rear crash bar. If the wheels didn't have the zero offset, it wouldn't be a problem. As I recall, I could only hear it slightly when in reverse, not forward. I've since removed the rear crash bars, and installed a 1" Zone spacer for when the 33's wear out and I go with 35's. Also installed the BroncBuster brace just to be on the safe side. This is what it looks like at just under 10k miles.

 

[Harles Garage]

Put my Bronze Motegi MR150 w/ Procomp AT Sport’s (285/70/17) on my Big Bend Bronco last night. I had these on my 2020 Ranger and loved the combo. (Yes I have a matching spare just waiting on tire delivery lol).
Next up , Bilstein Badlands takeoffs install

(17x8.5 +18mm Offset)

 

[ElDiabloBronco]

285 70s. Wheels are on the list but Im pretty happy with how it sits at the moment.

Sponsored