Spray it with PB Blaster and try it in the morning.Went to install exhaust. Was able to break the clamp nut free and loosen the collar, removed the isolators from the muffler, but after 3 winters, the muffler is not budging from the pipe. Going to have muffler shop deal with it.
My suggestion to anyone doing the swap in their garage: if you want to do it yourself do it early before anything rusts. Right now the muffler and pipe are frozen together, so don't wait 3.5 years like i did
Or, see if you can remove your muffler before ordering, I probably should have done that
and you'll need a 15mm deep socket for the clamp bolt, and i also had to use a breaker bar, so have those handy
Went to install exhaust. Was able to break the clamp nut free and loosen the collar, removed the isolators from the muffler, but after 3 winters, the muffler is not budging from the pipe. Going to have muffler shop deal with it.
My suggestion to anyone doing the swap in their garage: if you want to do it yourself do it early before anything rusts. Right now the muffler and pipe are frozen together, so don't wait 3.5 years like i did
Or, see if you can remove your muffler before ordering, I probably should have done that
and you'll need a 15mm deep socket for the clamp bolt, and i also had to use a breaker bar, so have those handy
Been in the same boat as Liberty, so letting a shop take care of it tomorrow. I did spray a ton of WD40 on the underside afterwardsSpray it with PB Blaster and try it in the morning.