Pros/Cons for Hyperco Lift Springs vs. Foutz Lift Collars for 1-2” lift?

[JohnGalt]

Been running these about 2 years now. I’ve noticed I’m almost exactly 1” squatted in the back. From ground to flare I’m 44” front, 43” rear. I took everything out from the trunk aside from maybe 40lbs out of the back of my Bronco (left my small jack,10lb tire difference, and the added weight of the armadillo top) and just recently rebuilt my shocks (it was doing this before the rebuild). Only thing I can think is it’s the springs.

Not sure if it’ll make a difference, but have you recalibrated ride height since servicing the shocks? If not, good to do and may change it a bit.

Sponsored

 

[swamp2]

Not sure if it’ll make a difference, but have you recalibrated ride height since servicing the shocks? If not, good to do and may change it a bit.

Ride height calibration is for the damper (shock) and can not affect static ride height. It's just not physically possible. It is solely determined by spring rate and preload, suspension leverage ratio and load.