- Thread starter
- #1
2021 Up Bronco Wildtrack HOSS 3.0 Spring Perch Collar.
These collars will increase the front and rear ride height on your 2021 up Bronco Wildtrack HOSS 3.0
’22-26 Ford Bronco HOSS 3.0 Spring Perch Collar Kit!
If you’re looking for a simple solution to increasing the ride height of your Ford Bronco, without swapping over to an aftermarket coilover set, this is your solution.
Why spring perch collars? We’re glad you asked.
The Ford Bronco factory coilovers are specifically designed to work within the distance between the shock bucket on the frame and the lower control arm (front suspension), or the shock bucket on the frame and the rear axle housing (rear suspension). Our spring perch collar kit simply preloads the coil, avoiding lengthening the total distance from the top mounting point to lower mounting point.
When you use a spacer to lift the vehicle, you are setting the top of the coilover lower than it should be. As a result, you will fully extend the shock before the suspension has reached it’s factory designed “full droop”, and momentum while continue to pull your suspension down further past the designed load angle of the factory ball joints and CV joints.
If you want maximum life out of your factory coilovers and suspension components, but also want to increase ride height for greater ground clearance and tire clearance, the RPG Offroad spring perch collar kit is your ultimate solution.
These collars will increase the front and rear ride height on your 2021 up Bronco Wildtrack HOSS 3.0
- Proudly CNC Machined In-House in the USA
- 6061 Billet Aluminum
- Anodized Black or Fox Orange
- Vehicle can be returned to stock – no cutting or trimming
Available together or separately- For local pick up in SoCal 92354
- Or shipped at buyers expense
- Forum price of 400$ or trade for a arms or other bronco parts
’22-26 Ford Bronco HOSS 3.0 Spring Perch Collar Kit!
If you’re looking for a simple solution to increasing the ride height of your Ford Bronco, without swapping over to an aftermarket coilover set, this is your solution.
Why spring perch collars? We’re glad you asked.
The Ford Bronco factory coilovers are specifically designed to work within the distance between the shock bucket on the frame and the lower control arm (front suspension), or the shock bucket on the frame and the rear axle housing (rear suspension). Our spring perch collar kit simply preloads the coil, avoiding lengthening the total distance from the top mounting point to lower mounting point.
When you use a spacer to lift the vehicle, you are setting the top of the coilover lower than it should be. As a result, you will fully extend the shock before the suspension has reached it’s factory designed “full droop”, and momentum while continue to pull your suspension down further past the designed load angle of the factory ball joints and CV joints.
If you want maximum life out of your factory coilovers and suspension components, but also want to increase ride height for greater ground clearance and tire clearance, the RPG Offroad spring perch collar kit is your ultimate solution.
Sponsored
