Search results

  1. Oregon WTB SAS rear coilovers or Badlands rear COs.

    I want a rear set of OEM SAS coilovers...
  2. Added Rough Country RC lifted knuckles ...now have 12.5" Wheel travel.!!!

    While trying to achieve a flatter less steep tie rod angle, I have achieved additional wheel travel. My solution for tie rod angle was to use RC uprights or knuckles. These have a tie rod mount 4" higher up allowing the tie rod to remain flat in a lifted truck. I've already shaved my...
  3. Possible B&O system Co-ax outputs?

    So while chopping my Bronco up and moving electronics outta the bed area (yes it has a bed now) I noticed on the B&O amp, a plug with four connections.... Immediately I thought ”I bet these are for co-ax low outputs”! Never seen a connection plug quite this size and shape, but found it...
  4. Half Cab Pick-Up Bronco Build! 🪚

    Almost done so I thought I'd start a thread. Chopped up a bronco more-doors top and did some fab work. Got a few adjustments to make and a final sand and paint, but overall I'm satisfied so far. The front two top panels still lock in place to the new half-cab the same way, and they are...
  5. Custom Bronco Half Cab

    Edit.. well after a bunch of post were deleted.....here we have bits and pieces now... After a bit more research, I've been able to determine that the roll bars ARE removable! (With a sawzall) This is fantastic news for those few of us looking to do a pickup or half-cab. . I'm very close...
  6. Wanted for test fit...REAR SAS coilovers to install in FRONT!

    I'm looking for a set of rear coilovers near Oregon to test fit on the front of a SAS ...this is for testing and fitting purposes. Anyone get new aftermarket shocks in oregon and wanta see if this works?
  7. Poll...Only 940 2 door FEs were built! What color is yours?

    We learned today that only 940 2dr First Edition were built! Mines number 73. Lightning blue. Curious what color was your choice on your ultra rare 2dr FE?
  8. Cut Sasquatch bump stops for 2”+ additional wheel travel and shock length -- pics

    Finally got my fabtech UCAs, so I thought while I'm installing them I would pull the coilovers and see how much bump stop is really in there.... Here's some pics of the whopper. I also took a pic of the overall length of the shock (for non-SAS Badlands owners to compare with)
  9. Ranger Raptor UCA and LCA fit Bronco?

    I've been doing a bit of research and it appears the ranger raptor (produced in THAILAND for the past 3 yrs) has a very similar front A-arm arrangement! The front diff is the same as well m210 d44. From my reading, it appears the A-arms are 30mm wider on the ranger raptor. And would...
  10. 74weld releases production portals for jeep...Bronco is next!

    74Weld has released the production portals for the jeep. Since the rear of the Bronco has a very similar axle to the Jeep, the portals will be available for the rear of the Bronco soon. Also, this summer they will be releasing a front Bronco version that is very similar to the ones used...
  11. Ford metal fender flares ...(Bushwacker) and Trail Armor installed

    Here's a few pictures of my 2 door FE on 37x12.50x17 with the steel fender flares Ford offers in the accessory catalog.
  12. RC diff-drop kit arrived!

    My rough country diff-drop kit arrived today. Thought I would post pictures of the parts. Looks easy enough to install from their downloadable 3” kit instructions. I'll be installing this (without the 3” lift) soon and report back. This is a solution for those that want to lift (with a...
  13. Gun racks? [⛔️ CLOSED & MEMBER BANNED DUE TO POLITICS]

    Anyone plan on installing gun racks in their ride? If so where do you plan to put them? Ideas?
  14. What is your goal for wheel travel and articulation on your new Bronco?

    Curious what others plan to eventually do to the suspension on the Bronco make it satisfactory for each user? For example, my longterm plan is to eventually have 15” of wheel travel at all four corners. This will include longer A-arms and tierods and axles. I've been playing with...
  15. New Brembo Brakes Upgrade coming soon!

    Talked with Lethal Performance today, and it seems that the new Ranger Raptor Brembo brake upgrades will be available soon....as well as for the 2021 Bronco. This is excellent news for some of us with more power and bigger tires. Better brakes is welcomed by me. They say off road...
  16. DONE! I have re-drilled rear shock mount 2” higher, =more clearance and 2” lift.

    Anyone see any issues with repositioned rear lower shock mount bolts??? I plan to drill new holes 2.5” higher up and then reinstall the shocks. This should lift the rear about 2.5 inches. If I like the way it rides, then I'll cut the same 2.5” off the bottom of the ridiculously low shock...
  17. 37s fit well w/minor trimming and leveling kit

    Picked up a set of 37x12.50R17 Maxis Trepador Radials. Sasquatch wheels. These fit very well. No rubbing around town at stock Sasquatch height. Under full compression with swaybar disconnected, there is NO rubbing in the rear, however the front needed a bit of trimming in a few areas. An...
Top