Search results

  1. Underbody aluminum skidplates and protection by ASFIR 4x4

    I’ll vouch for Asfir….I got my skids in 1 week from the time i ordered….I’ve been waiting 3 months for some other bronco parts being built in the states. Lol.
  2. Ford Beadlock rings? Painted?

    https://www.lethalperformance.com/ford-performance-m-1021k-bl5-functional-bead-lock-ring-kit-2021-bronco.html This is the best price I’ve found…and also from a great company to work with. I have used beadlocks on the street for years. Follow the directions. Keep them torqued, check a couple...
  3. ARB Compressor Engine Bay Mount from KR Off-Road (NOW SHPIPING)

    And if you pull out all the wires you don’t need, and fish the purple wire into the battery harness, it makes for a nice, clean install.
  4. ARB Compressor Engine Bay Mount from KR Off-Road (NOW SHPIPING)

    https://www.harborfreight.com/38-in-x-25-ft-rubber-air-hose-58544.html https://www.harborfreight.com/38-in-professional-air-hose-repair-kit-5-pc-63957.html Then you would need the proper fitting. The compressor and the arb quick connects are 1/4” NTP thread. That’ll be specific to your setup.
  5. VELOCITY BLUE Bronco Club

    Velocity blue is such a great color! It’s definitely the best under artificial light at night though. And tint really pulls it all together!
  6. Underbody aluminum skidplates and protection by ASFIR 4x4

    I have the base bumper with the plastic slash shields. I have an ADD bumper coming. I’ll get their front skid plate that matches. These just seemed like a great, semi cost effective, aluminum option available NOW. No regrets from me!
  7. ARB Compressor Engine Bay Mount from KR Off-Road (NOW SHPIPING)

    I did a test today after i got my rear quick connect hooked up. 1:52 to fill a stock Sasquatch tire from 15psi-39psi with the dual compressor! Very happy with those results
  8. ARB Compressor Engine Bay Mount from KR Off-Road (NOW SHPIPING)

    Yes. I started with a small pilot hole, worked up to a half inch. Then used a “step bit” to get to the proper size so i didn’t trash any bits. It wasn’t bad, really.
  9. ARB Compressor Engine Bay Mount from KR Off-Road (NOW SHPIPING)

    I guess anything could happen, but it’s pretty far away. Also, this thing is mounted in a 3/4” bulkhead fitting; it’s VERY solid.
  10. ARB Compressor Engine Bay Mount from KR Off-Road (NOW SHPIPING)

    I rigged up the rear fitting last night. Easy to access, completely protected. Pretty happy with how this turned out. Just an idea for those looking for a place to mount a rear quick connect.
  11. Underbody aluminum skidplates and protection by ASFIR 4x4

    I’ll probably modify the front bolt holes on the transmission skid with these since i had them in my junk drawer. This should be like a 10 minute job since that skid plate is only held on with 4 bolts. All of the bends are perfect, everything lined up great. The fuel tank skid is awkward to...
  12. Underbody aluminum skidplates and protection by ASFIR 4x4

    I got these installed this afternoon. Pretty happy with them overall. Easy install. Quality is great. Very light for what they are. Since i didn’t buy the front skid (I’m buying the one that goes with the bumper i ordered), I had to cut the stock plastic “splash shield” to fit. I made it look...
  13. Underbody aluminum skidplates and protection by ASFIR 4x4

    Mine just showed up!!! For anyone hesitant on the “overseas” shipping…it’s NOT an issue. I got these in 8 days (they got hung up over the weekend at the local hub). Blown away by the packaging and the quality of the product. Nothing but good things to say at this point. 1/4” aluminum is no...
  14. 2022 Broncos No Longer Have Temperature Setting Displayed on Control Knobs

    Don’t feel bad. My 2021 doesn’t show the temps, 😆 Don’t have to worry about that shit when you get the peasant base model. Lol. But that would bother the hell out of me!!!
  15. Which Compressor should I get?

    I hate that the sticker is upside down on mine, but that’s just how the wiring was going to route the best, and i liked that the fitting angles back because I’m going to be running tubing down to the frame rail, this is going to give me the best transition with it angled towards the back. i...
  16. Which Compressor should I get?

    I actually didn’t think the fit was too bad with the 2.7. It fits very well. I just need to connect the modified wiring harness, then it should be good to go. SUPER easy install. i also need to finish installing my rear port as well, but that’s not required.
  17. ARB Compressor Engine Bay Mount from KR Off-Road (NOW SHPIPING)

    Thanks for the candy!!! 😂 The quality of the bracket is pretty damn good! It definitely surprised me. And the finish of the powder coat is definitely one of the better that I’ve seen. It really makes you understand the cost of the bracket. This isn’t a $3 piece of chinesium! You guys packaged...
  18. Base Model Owners: Official Thread

    The spot mirrors are really good, actually. I use them for sure. I have no regrets about ordering a base Sasquatch.
  19. ADV Fiberglass - Bronco Hardtop Teaser - Part 3

    Wait, doesn’t the 2 door come with a hardtop? Lol. Us 4 door soft top folks are just sitting over here with melting looking window and shit. 😆
  20. Underbody aluminum skidplates and protection by ASFIR 4x4

    Definitely will do!
Top