Search results

  1. Washington Front Steel Capable Bumper + Front Steel Skid Plate

    Selling my take-off bumper and a skid plate. Great condition! The bumper includes the fog lights. 600 and 250 or 800 for all. Or the best offer. Picking up in Gig Harbor, WA
  2. MORIMOTO XB HEADLIGHTS | Photos/Video of these new headlights

    But you take pre-order, right? You just don't have them on hands to compare?
  3. Wiring Warn’s power interrupt kit to the AUX

    I understand it's for the button, not the winch. And the diagram says 5amps. It's like a button for an ARB compressor. You can use a button, and the switch has power, ground, and a wire to the compressor, OR you can take the compressor wire and connect it to the AUX as AUX already has power and...
  4. Wiring Warn’s power interrupt kit to the AUX

    Quick question. I want to install the kit, but instead of an included button I want to use the AUX. So do I need just connect the yellow wire from the solenoid and skip ground and 4 amp fuse wire?
  5. What are you using for chase lights?

    Agree, looks like you just don't need reverse lights :)
  6. What are you using for chase lights?

    I understand. They work fine. I haven't tested them in the dust, but they work great as required by reverse lights, I mounted them slightly down, and they are on eye level, still.
  7. What are you using for chase lights?

    You could but you need to find a way to put a connector there. And it does not work with lights on both sides. They should be closer to each other. Check the video, you will get it.
  8. What are you using for chase lights?

    Yes, you end up without lights, but it's just two connectors. Just unplug them and remove the bracket. Not as convenient as lights on the rack but the setup is more straightforward and having good reverse lights on a daily basis VS once a year chance a tire in the night...
  9. What are you using for chase lights?

    The Bronco kit doesn't have a switcher. It's plug in harness plus a wire to the aux.
  10. What are you using for chase lights?

    I had the same dilemma and ended up with a DD reverse kit. I don't need chase lights with amber every day, so putting on filters is not a problem. But having a good reverse light on a daily basis is a good idea. And I don't have to have 2 sets of pods and wire them. Wiring to an AUX is not a...
  11. What are you using for chase lights?

    You can use it for both purposes.
  12. What are you using for chase lights?

    There is a wire which you could connect to AUX and override the lights.
  13. What are you using for chase lights?

    It looks more like f..k off lights rather than chasing :)
  14. What are you using for chase lights?

    Exact the same + amber covers for chasing lights.
  15. Device Holder - 67Design vs BulletPoint Mounting ?

    I have Tackform, like it a lot. Out of curiosity I ordered some stuff from 67D, will compare soon.
  16. Washington Badlands Grille with letters

    It's pending
  17. Fullscreen Apple CarPlay OTA Update Coming Soon! - Per Ford (Mike Levine)

    That's weird, I don't have it and I don't have any new updates... Badlands 22
  18. Midlands MXT575 Mounting ideas???

    I was in the same boat about AUX VS battery VS fuse box. I went to the AUX, as it allows me to turn on/off the radio and not worry about draining a battery (as the AUX works only with the ignition on). It's a double-check, though, as I can turn on/off a radio with a button, and it looks like if...
Top