Search results

Indeed

Thanks for the info!

Looking to purchase this item. For those of you with experience using dual or quad hose systems to inflate all tires at once (or in pairs), do you think we can DIY a dual set up and the inflator will be capable of pushing air to 2 tires? I understand the time constrains and possible loads on...

Added a 2 in foam mattress to soft top and used left over Kilmat for my hood. The mattress topper makes a significant improvement over road noise to include wind noise. I should have ordered a 3 in one as it will fit if you cut slots for the soft top metal bars. The hood sounds more solid when...

Here you go. https://www.mtiacoustics.net/ford.html#!/2021-Bronco-Dash-Speaker-Panels/p/503984168/category=154083001 Sounds Good Stereo use to make something similar, but pricier (not that the MTI one is cheap). But for a custom install, I think their offering looks professional and well...

I just mounted the brackets to the light bar, clamped the bar to the bumper and marked location with a punch hole. Drilled small hole as a pilot, then the bigger holes on the bumper (very slow and steady hand as the lower grill was close to the drill head) and mounted the bar. The light bar...

Added a Hella Black Magic single row light-bar to bumper. Install was easy without removing the bumper. Light output is adequate for my needs.

Here you go. In hindsight, I should have made another hole and run an additional cable.

I did something similar without drilling on the dash or installing the USB base. I removed and Drilled one hole on the accessory ready mount. Installed a rubber grommet on the hole and fished a USB cable down behind the screen to the factory USB and USB C connector. For the sake of appearance...

I got the tackform. Works great and moves the phone about 2 in forwar d from the dash. This allows for the ac vent to provide some cooling effect for my iPhone, preventing some overheating as opposed to under the windshield. https://www.tackform.com/pages/shipping-info

Thanks for the info. Wheels look amazing!

Nice! Is that your garage floor? If so, How do you like the flooring? Do the tiles move when you turn the wheels on your rigs? I am looking for an alternative to epoxy or paint.

Nope. They provide structural integrity.

That’s as American made as apple pie!

I used this tiles from harbor freight for a similar application. They are holding up well and are non-slippery. https://www.harborfreight.com/self-adhesive-rubber-safety-step-mat-98858.html

It is normal. I have not purchased this item yet (I will once back on stock) but using the factory usb one while running CarPlay and google maps makes the phone very hot (apple 12) to the point that it will shutdown on long trips. I also have an Atlas and it does the same.

No need for the boom mats as they won’t offer any benefit. Better off using some killmat on the kick panels and poly fill on the pods.

Added DIY Badlands logo to front gill

Thanks! Will do!

I have a 22 Non-SAS Badlands that will never see any hard core off roading, but planning to travel to mountain bike destinations, national parks and photography locations for the wifey. Currently doing research for an overland trailer -3500 lbs. I added the Tow hitch and planning to add the...