Sponsored

Search results

  1. Front End Friday! Show off your Bronco!

    Guess I'll toss mine up then! 😆
  2. Interior Camp Platform / Power System Build for 4Dr Bronco Badlands

    You'll probably have better lucking making a new thread for this, since it has nothing to do with this one.
  3. Rear Roll Bar Mount Measurements

    That's another M8 rivet nut... so anything up to an m8 x 25 or 30mm bolt would work there. It's a single bolt on each side so I don't have a distance measurement from another reference point. I don't use the side bolts for any of my modifications so it's not in my cad design library.
  4. Rear Roll Bar Mount Measurements

    104mm spacing, 9mm through holes to accept the M8 bolts (M8x1.25mm) Also worth mentioning that they are rivet nuts in the frame, so there is some variance with how they center when compressed during installation. For that reason you could be on the safe side with one of your two mount holes...
  5. Rear Roll Bar Mount Measurements

    Yep I will pull them from my CAD later and reply back (y)
  6. Interior Camp Platform / Power System Build for 4Dr Bronco Badlands

    I really appreciate it! That was certainly the goal.
  7. Interior Camp Platform / Power System Build for 4Dr Bronco Badlands

    I appreciate the kind words and apologize for the delayed reply. I didn't use any guides for the removal and it was pretty straight forward (although i have pulled seats from other vehicles in the past). The only small nuisance was the seatbelt removal under the seat. You have to unbolt it to...
  8. Interior Camp Platform / Power System Build for 4Dr Bronco Badlands

    I use BattleBorn batteries bc of the quality of their internals (cell matching between packs, design and build of their BMS, the actual usable capacity of the pack, and their warranty). I've used them for years in commercial/military settings and their quality is a noticeable step above the...
  9. Forscan Allow Nav Entries While in Motion Issues - No Longer Possible?

    Yep its really frustrating. I don't use the built in nav, but do use a usb stick with uncompressed audio files on it for audio. I cant browse that source while driving so literally have to pull over to change albums or artists. This forscan change fixes that, but the KIP text corruption is a...
  10. Forscan Allow Nav Entries While in Motion Issues - No Longer Possible?

    Curious if anyone has made any progress with the KIP issue? The master spreadsheet should be updated to note that this feature is now broken.
  11. Custom Console Offroad Phone Mount

    For anyone that is interested in this solution, shoot me a direct message and I'll try and help out. I won't be following this thread consistently since its become a bit of a show and tell, but don't want to leave anyone out in the cold that does need this something like this.
  12. Custom Console Offroad Phone Mount

    Not everyone does need it or something like it. I did so I made it. I dont use car play and many others dont either. I also offroad mine a ton so a very sturdy mount for that purpose using apps that dont play through android auto is very beneficial. Most people who buy offroad trucks are also...
  13. Interior Camp Platform / Power System Build for 4Dr Bronco Badlands

    Hahaha... yea i had nothing to do one Tuesday evening so I just threw it together 🤣 I appreciate the kind words 🙏
  14. Custom Console Offroad Phone Mount

    Yep it charges very cleanly from the center console 👍
  15. Blind Spot /Cross Traffic Warning -- Failure mode was detected was corrosion within wire harness in rear bumper.

    I just had my 23 Badlands in for the same issue... with 7k miles on it. Really disappointing.
  16. Custom Console Offroad Phone Mount

    For sure. Ram makes all sorts of different arm lengths that could be combined to achieve any angle. I don't use the handle so i wasn't worried about additional clearance, but it could easily be configured that way.
  17. Custom Console Offroad Phone Mount

    Nice.. i dont use the magbase system but would adapt mine in a similar way if i did. Looks good!
  18. Custom Console Offroad Phone Mount

    I feel the same way, especially with regard to the quick insert and removal when in and out of the truck a lot. Any arms leveraged off the dash concern me with that load transfer as you pull at the device over and over again. What I made is so rigid that it doesnt move when i pop the phone in...
  19. Custom Console Offroad Phone Mount

    Because of the angle of the arms coming off of the dash with a rail, you get significantly more vibration and device shaking than with an arm supporting the device from below. That is my only objection to a dash rail system. If i needed to mount a ton of items, that would certainly be the way to...
Top