I purchesed the Warn winch kit from Ford since it was a great deal. Warn is offering a rebate on there winches. So I sent in my Ford receipts to apply for the rebate.
Warn rejected it, first saying that the receipts did not have enough information on them.
After calling Warn 3 times and leaving...
I am adding a Warn evo 10s winch to my Bronco. The instructions say to wire it direct to the battery. But, I want to control the power by using one of the up lifter switches.
Warn sells a solinoid that I want to use to control the power going to the winch. I know how to do all the wiring. But I...
All right so I pulled the trigger and ordered the warn winch kit from Ford. Now I need to order a camera relocation bracket. Most are about $140. But Rough Country has theres for $69. I did notice the the bracket from Rough Country sits up higher. Will this give a better view when in the mode...
For any of you that have added fog lights or driving lights that have the amber back lighting, where do you wire that circuit into. They could be any brand.
I don't want to use one of the up lifter switch positions. I found one company that sells a wire harness to tap into the head lights...
Anyone install seat covers.... I just want some inexpensive covers I can put on over the factory seats.
I want to cover them when I go off roading just to keep the leather clean...then pull them off.
Any pictures would be great.
How do you get the wiring to the roof for a lite bar? Do you have to drill a hole in the roof under the access point?....if you have a picture that would be great help.
Has anyone mounted their Rotopax packs to the roof rack using anything other than the over priced Rotopaz mounting hardware?....pictures would be great....
Who has installed IAG mud flaps with Ford factory rock rails?
Started installing them today on the drivers side front. Seems like it bends yo much and hits the tire.
The first bracket that you install, in the directions it says mount using the top two push pin holes. If you do that the bracket...
I removed my bead lock rings to have them powder coated. And yes I striped one bolt. I did get it out, but I need to replace it.
I went to ford to buy one. They want $20 for one bolt... they are nuts.
Does anyone know where else to buy them. I triad local hardware store, auto parts store,amazon...
Where in the owners manual do I find the wiring colors and locations for the Aux switchs. I only have the manual that loads from in the car.... just cant find what I need