Search results

I have the front setup in the attached photo. I'd like to replace the plastic front bumper with steel. Is there an aftermarket bumper I can use with this Asfir front skid plate? I'm fine with keeping the factory front tow rings. @ASFIR 4x4

From testing, it seems the low tire psi error light is triggered when the psi falls below 35. I just purchased some new tires that are load Range D. Using the chalk test, I need to run them below 35 psi. Can this minimum tire psi be adjusted with Forscan?

I just purchased a set of Mickey Thompson Baja Boss A/T 35X12.50R17, load range D. Any idea what a good tire pressure is for these? I was doing the chalk test. I drove around to heat up the tires. Started at 41 lbs warm and kept going down 2-3 psi at a time. When I got to 30 psi all around, I...

Anyone here have ties to Steel City Broncos, near Pittsburgh? I was told they frequent an off road park near me but can't find any trace of them online. I'm looking to go off-roading at Ben Franklin Range on July 15th but I don't have a second vehicle to go with me that weekend. I was going to...

Auto-Stop Eliminator. Works as advertised. Used for a few months. I purchased the ProCal Tuner and it includes an auto-stop memory feature. So, I don't need this anymore. $60 Buyer pays shipping from Pittsburgh, PA. Here is the installation link...

New OEM Cloth Floor Mats for 4-Door. Front and back set. Part #U725. Unopened bag. $40 Buyer pays shipping from Pittsburgh, PA.

Maybe I'm thinking about turbo lag incorrectly. I'm open to an education. I thought it was the lag time between stomping on the gas and the vehicle responding. Seems to be about 1 second in the Bronco. This is kind of annoying when pulling into traffic. So, I purchased a Banks Pedal Monster. I...

Selling new Stickerfab Matte Black Hood Overlay. Pack of 2 (just in case). $30 plus shipping. Or, I'm located near Pittsburgh, PA for pickup.

Selling a set of running boards for the 4-door Bronco. Used for 6 months. Very easy to install. Good condition. Some rock chips on the bottom front. Running boards only, no bolts included. I kept those to fill the screw holes. They're just M12 bolts. $100. Pickup only ....unless you really...

For Sale. Full set of door bags for 4-door Bronco. Front doors and Rear doors. These are OEM bags. Still in the Box, unopened. Asking $300 + Shipping. I live near Pittsburgh, PA for pickup in person.

I put on the @ASFIR 4x4 front lower control arm skid plates a few months back. https://www.asfir.com/arms-skid-plate-599657.html. About a month after installing them I started hearing a creaking when I would turn my wheels while stationary or moving slowly. I traced it back to the shock bolts...

Seems like a lot of people are looking to put a factory tow hook on the rear passenger side of Broncos that only come with a rear drivers side tow hook. The Ford dealer parts department didn't have an easy time finding it, but they eventually did. Not cheap, though. $71 for the hook and $6 for...

I will be installing the Asfir gas tank skid plate. Does anyone have the torque settings from the service manual for the gas tank mounting bolts? Thanks.

I purchased the Ford Bronco Front Lower Arms Protector Skid Plates from Asfir. I went to install them today. The one side went on fine. The other side not so much. The kit came with new nuts to replace the original ones. I followed the torque specifications on the included sheet. 117Nm...

I bought the 6 ton Safe Jack starter kit. It came with the bottle jack, 3 inch extension, flat top, and curved axle cradle. I wanted to just try it out today. There was no problem lifting the back tire at the axle. Then I tried to lift the front tire using the 3 inch extension and the flat top...

Does anyone know where to purchase these clips? This is a picture of the rear panel.

Has anyone come by any organizers that will make the cavern in the center console more useful? It's just a big hole under a tiny little tray. I think I may have lost a small animal down there.

Yesterday I installed metal front door pockets to replace the elastic pockets. Nice upgrade. I bought them from Mountains 2 Metal. Great quality and perfect fit. Stupid easy to install. I added more photos to show the edges. Nicely folded over and the corners aren't sharp at all. Looks much...

I was in Forscan and noticed the rain sensor setting in SCCM was disabled. So, I enabled it. Am I being naïve that this will turn on rain sensing wipers? Is this for something else?

So, I broke one of these panel clips clips when I was installing the auto stop eliminator. Do I have to go to a dealership to purchase them? Or, does anyone have a link to where I can buy them online? Searching this forum wasn't getting results. Thanks.