Search results

I'm up to 48K on mine. Have changed plugs due to fouling and misfire codes. I also only buy premium gas now. The price difference evaporates when you have to have your rig towed to the dealer and lose it for 2 days because the plugs are cooked. It was an easy job to do myself, I'll check...

Same experince for me with 2 different F-150's. @Mike777 did you end up with this kit? Thoughts? Mine has just started the expected "Stock Ford rotor judder" at 45K and I will be going aftermarket when its time.

Thanks @CarbonSteel for compiling the info and parts list. You made this very easy. I did mine at 44k. Had a small olive sized glob of paste attached to the rear diff mag, but fluid wasn’t what I’d consider bad. Front diff had a slight smear on the mag. Only took 1 qt in the front, I guess...

This. The engine code is easy to see, and it will be "AB" if you've been replaced with the 2022 version. My Ford Pass shows a recall notice, I guess because the repairing dealer simply put "Engine/Other" in the service record when they replaced my motor. I'm wondering if they can pull the...

Loss of motive power.....haaaa. My experience was more like "Silence, followed by every warning error available popping up on the dash, followed by massive cumulous clouds of vaporized coolant as all liquids exited via hot exhaust"....luckily I was ablel to coast down my exit ramp and into a...

See the post above, mine is better but not gone. I refuse to spend $200 on a new brake line because Ford won't sell the clips indivisually. At least I know what causes it.

most of my fills ups are at Food City grocery store using points. No idea where they get the gas. Ironically the first misfires started just after a Kroger fill up north of Atlanta.

Just sharing my experience as folks will start to accrue mileage. i started having hesitation and obvious misfire conditions under acceleration. It finally popped some codes, which came up as multiple cylinder misfire, and all individual misfire codes P030x on my handheld reader. ( They are...

After being a KO2 fanboy I'm now in love with MT Baja Boss....not that anybody asked. :)

Now if they'd only fix the cam phasers....

Nope. I did this very thing. I have lights on 4, 5, 6. Stickerfab sells great labels.

One word of caution, even the fog's are very very bright and you'll probably get flashed for blinding other drivers. I put all min on the aux switches to make it easy to control them. YMMV.

Confirmed. Found a tag on the line itself. Good to go.

Thanks for keeping the masses informed. I‘ve searched several online ford parts catalogs and am not having luck finding this part #. it’s the plastic clip holding two lines against the frame under the drivers door. It makes a horrible noise as the lines pop in and out. Before I rig something...

Hi looking for the part# for the plastic clip that holds the brake lines against the frame under the drivers door. @flip any help?

Figured out my noise finally, here's the details: Sound: Metalilc "thunk", not a grinding, not a clicking Big bumps/off camber situations, start from/stopping Worse when its wet out, or after going through water/puddles Sounded like left front from the drivers seat I finally figured out its...

Nice find, this kit looks pretty complete. I'm hoping its used more to help out others than repair my own rig. :) PS, I noticed your other vehicle in your sig. I traded in a 2014 Supercrew Platinum F150 with the 5.0 for my Bronco. I can honestly say the only thing I miss are the fart fans...

10+" in my area is rare. So much fun!!

Is yours constant, only in 4x4, only over bumps.....any more detail to share?