Hey Forum,
I ran into an interesting problem today, looking for your ideas/solutions if you've had a similar experience.
I went winter offroading today, it was COLD, around -18 C (0 F). This particular route has a few river crossings. The deepest one was a good 18" with a frozen top layer, so...
Hey Forum,
I had the RPG perch collars for HOSS 2.0, ( the 2.25" / 1.25" kit ) laying around that I finally got around to using . I used the 1.25" alone and had it installed on the front as a leveling option.
On a HOSS 2.0 Wildtrak, 2 Door with winch, it raised the front 1.125", so very close...
Ok so last year, Tricky had his whole thread about bending his frame horns while winching.
I, like many others, decided to beef up their RC High Mount winch and bought either a kit or made a homemade solution to beef up their frame horns. Ok awesome, done, beefy MoFO, let's go!!
The trouble I...
My Bronco is in for an oil change and the techs are reporting that my rear pads are at only 3mm of thickness left. 8,000 km ago they were at 8 mm. I've only taken the truck off-roading once since my last oil change, any idea how the rear brakes could get so worn, so fast? I could see if I was...
Was out wheeling today, got the dreaded "Charging system - Service Now" warning after hitting some muddy patches. Made it home but now the battery is at 11.6 V.
Question - I know they are going to have take out the old alternator and replace with a new one, plus add the shroud / cover. As a...
Ok Bronco peeps. I respect your opinion, so much so I'm basically copying many of your winch mount ideas.
So I come to you asking for another opinion - colours.
I have a cyber orange 2-door WT. What colour shackles would you get? The reason I ask is because, as my wife has told me many times...
Hi everyone,
I'm curious if anyone has had a similar experience to what I'm having. I am taking the Bronco to the dealership next week, but curious as to anyone's experience here.
The air conditioning seems to be quite finnicky. While it typically works as intended, on occasion it has an odd...
Hello forum,
I am looking for bottle jack accessories - namely a flat pad and a pad that could be used for going around the axle. I haven't found much out there that isn't ridiculously overpriced (and that will ship to Canada), so I'm wondering if anyone has recommendations? Or if not, how much...
Hi Bronco6G forum, I'm hoping someone who has a Sasq package can check some measurements (that may require a bit of trig). A few have asked about scrub radius before, with no answers. I'm hoping a thread definitively asking with instructions will at least get me some measurements and I can...