I'm a two door adventurer, and with my back packing experience, I've learned lots about compromise, how to multi-pupose things and save weight and space 👍🏻
That's one feature I didn't disable on my Bronco's. I don't think there's an option in ForScan directly for the auto stop...
I think some peeps have figured that if you do something with the steering position or angle sensor, it prevents the engine from shutting off. I think. 😁
Yeah, I got a RAM knock off mount on Amazon (attached to the cheese plate)
https://a.co/d/8pezU9W
FANAUE Bolt Head Adapter Ball Base MB-02 with 10mm Mounting Hole,Right Angle Motorcycle Mirror Mounting Base, Compatible with DA-60 DA-90 DA-150 Double Socket Arm and B Size 1'' Ball for RAM Mount...
I think the only chance they'd have legally, maybe, is if Ford actually knew which VIN's were effected.
They probably had a good idea of which valves were bad....
But I think the same thing applies to the 7MT issues/TSB. (not a recall?)
They'll repair MT's that go bad but they're not...
Good advise! I've had seized sleeves also tear apart the rubber bushings before, removing LCA bolts 😔
At that point, it would be a much bigger job! Lol
Hanging all that stuff on the hitch basket will actually LEVERAGE down the rear end, being that far from the rear axle compared to having that same weight OVER the rear axle.
If you have room on your roof, ahead of the RTT, I'd rather load that up before even looking at one of those hitch...
I've seen strut replacements done by removing the inner-side LCA to get clearance for removal. This way you don't have to undo the axle, end-links, brake line bracket, tie-rod etc.
If you're going to do an alignment anyway.... 🤷