We are not affiliated with NVM in any way nor did they ask us to post about it. THE UHMW skids are a life changer though and sooooooooooo awesome to slide on. Unless you have a lowrider bronco that got high centered on a rock. Going up the initial climb on hells revenge. Then the slippery...
Here's a good one for the forum-
Grounding. In this case, a rear winch for the Bronco. It seems to be a hot topic elsewhere on the internet, but I know there are some solid users in here capable of making us believe their typed words.
So! Ground that rear winch to the frame, ground the wire...
Had to pull a bunch of stuff apart anyway so why not go a little farther and pull the portal, put the stock knuckle on, then do a comparison video? Yes. I thought the same thing. There is no reason not to.
The camera angle is exactly the same in each video. Started and stopped the recording...
Fire extinguishers, parts & links compilation from the fire thread. Much easier than going through all the posts to find relevant information.
Backstory: https://www.bronco6g.com/forum/threads/we-burned-our-rig-down-jk-but-could-have-been-bad-fire-extinguisher-saves-the-day.101905/
More info...
Allllllllrighty. Background for those not familiar with every tiny aspect of our mods (not that all have been shared in any kind of useful manner)
TLDR: Fire bad. Extinguisher good. Check your electrical connections.
Wanted an air compressor, but didnât like the idea of mounting it under the...
Finished putting this together. Annoying as hell with phone movie app not finishing the export. Ended up just playing the preview and screen recording the entire thing. Seriously. So whatever quality that is is what we get đ
Itâs a culmination of footage from everyone in attendance, so some...
Just got back from Moab and time to give an honest assessment on this somewhat controversial/debated upgrade. People have a tendency to abstain from saying anything bad after spending such a crazy amount of money on an accessory, but thatâs not me and I owe nothing to 74Weld. No notes were taken...
Had an opportunity to compare a few different systems so we decided to have a race. Details are in the description so I wonât bother writing them again.
Swapping from conventional ball joint tie rods to full heim with yokes will cause an increase in bump steer due to the change in pivot distance at the steering rack. We didnât take any before measurements as we werenât certain how useful theyâd be seems how the swap to heim tierods was done at...
Went to change the break in oil on the diff and start tearing everything else apart and noticed all kinds of grease has been leaking from the passenger side CV axle. And the boot almost looks like it has a vacuum on it-I cannot pull those creases out. I donât see any holes but itâs kinda hard to...
The only way to really tell who the serious offroaders are is by how many stickers they have on their rig. The bigger the billboard, the better the driver, as we all know. Well now there should be no doubts that Mz Sierra is super serious with the mods.
Just a heads up!
If you have the BOSS 4X4 links, the aluminum misalignment spacers take quite a beating during use. If you contact the manufacturer with your order number theyâll promptly send you a set of steel spacers at no charge. Pretty great customer service
Hereâs a video with some highlights of doing the FDU and steering rack while on the garage floor. Really wasnât too terrible, all things considered. And the neck doesnât hurt from looking up.
If you were curious, you do need to remove the steering rack to get the FDU out. Just doesnât seem...
As some might be aware, one of the downsides to Heim Joints is their decreased life due to exposure to the elements. They require more attention than conventional ball joints as dirt and salt accelerates wear. But for some of our builds, itâs an acceptable trade off for the significant increase...
Just got back from Moab and had an opportunity to thoroughly test these skids on our four door. They are fantastic. The UHMW cladding is unlike anything else as it almost acts like a cushion when dropping onto the belly. Itâs now very soft when touching down and sliding is silent. If youâre on...
Hereâs the write up on the rear winch install we just completed using the APG rear winch mount.
With the triangulated four link and PB&J lower links (shipping today) it looks like it shouldnât take too much to pinch the exhaust between the truss and the frame. We took the exhaust back with a...
With the ARB drawer installed the hidden compartments are completely useless. I decided to make use of the big guy by putting a compressor in there. I saw a very slick design by DV8 that replaces the stock box with a bigger unit designed to carry a twin compressor-bolt holes already drilled and...