Just to clarify: this is only because they hadnāt included it yet during production, so I had to add it myself. And yeah Iām not a pro at sealant š They have since added it to all the tops going out. Without the seal there water will leak into the top so I used Sikaflex 221. The āfadedā look it...
Mounted some tools to the interior MOLLE shelf with some harbor freight tool mounts! Worked out great and fits nice and snug under the Raptor brace. Hereās a Thread with all the details if you need it!
If youāre looking to add some tool mounts to your MOLLE shelf, hereās an easy addition that cost $12 and took about 30 min!
bought these bad mamma mammas from Harbor Freight for $2 each
Drilled out the hole with a 5/16 bit
Attached mounts to MOLLE with THESE armadillo MOLLE mounts
wam...
Just as a data point: I have Hyperco and have a 1/2ā sag on my rear passenger side. Havenāt been able to determine the exact cause but Iām thinking itās something shock related and not spring related
Correct! The upgraded intercooler keeps the temperatures lower and more consistent. āNo power lost is power gainedā mentality. The S&B cold air intake replaces the factory air box under the hood and has a few benefits as well. The obvious ones are in looks better than stock and has a nice...
They are holding up great! I had some StickerFab stuff that has peeled off and I threw away but the TuffSkinz looks as good as the day I installed them. I might order some more pieces now that Iāve seen how good they hold up. I had the CF package from the factory as well
Finally got around to installing the XM antenna/ GPS on the top! Write up on how to do it is below.
https://www.bronco6g.com/forum/threads/sirius-xm-armadillo-install.107397/
Next up is the RotoPax and Tractions board MOLLE mounts. Already have some good progress on those!
Hello! This write up serves as a guide for anyone interested in relocating their Sirius XM/ GPS antenna with the Armadillo top. While the GPS still worked fine, the XM couldnāt get through.
Materials needed:
- 3/32ā drill bit
- 1/8ā drill bit
- Step bit to 3/4ā
- Exacto Knife or stamp tool
-...
As for the sentry mode yāall are talking about: I think only the G900 has that function and not the G900Pro. I canāt find that setting in mine, only the āparking modeā which does a Timelapse and the G-Sensor if you get hit. Is that right or am I missing something?
The sensor on the mirror is just for auto dimming the mirror. I found this out when I got tinting done, they had it upside down and the mirror was always full dark. Took me a few days to figure out why.