Oh, perfect! Only needed 16". Thanks for getting back to me.
Gonna see how their upcoming drawer and slide shelf products look and price out and which shelf system will work best with them if I go with one. Otherwise this looks like a winner.
I like the ability to clean and refresh that aFe filter without the oil. Higher upfront cost but better long term value. Thanks for recommending.
The more I learn about oil breakdown, the more I think the old school 3000 mile oil change interval makes sense.
Man, this is alot to take in. Appreciate the real talk on mpg needs at Ford versus whats truly best for our engines and components.
Looking at your analysis data…Any concerns on your fuel dilution increases?
Also, did you settle on which air filter to run?
Given that a OEM Raptor wheel/tire combo would be about 12 lbs heavier (16 with beadlock added) than the SAS combo...at least that, so a couple gallons of gas.
IF this happens to me I will take it as a sign from the universe to just order the new Turn Offroad bumper with carrier and not have to...
Looks pretty straight forward and easier than most where you need to replace the tow hooks. On this you just mount the drop in hooks on the existing tow hooks, bolt the fairlead plate on, bolt on winch and done. Secure with pins when in use.
Although, this did make me look closer and wish the...
Gonna look mean!
If yours has factory Aux switches can't go wrong with Aux 1 since it has the highest amp draw rating (30A). Aux 2 is 15A so may not leave much room for error on a light like with that much juice.
Or did you mean you have to route a switch that came with the lights?
This was my first reaction as well, but then I thought back to when a bunch of members put the unproven Rough Country high winch on and some, not all, depending on use...discovered that they needed frame horn support.
The community will be the real testing ground for any aftermarket product.
At...
Given my current setup and relay to aux 6, I could see putting an in-line Anderson connection on my current power wires, but would find a way to secure it under the bumper when not in use versus having to pop the hood.
These guys are selling a mount, not a complete package. No different than...
My bet would be they just provide the mount and you decide how you want to power whichever winch you put on it, which could be a lot of options. Agree though, something to consider having just installed a relay to conveniently power the winch from the Aux switches.
I'm using a 15W Midland and 3db ghost antenna mounted inside on my PVO Traction Board Brackets...can hear and transmit front to back on group rides of 20-25 vehicles pretty spread out trying not to eat dust.
Any antenna with an NMO mounting can be taken off as needed and caps are available to...
I think OP will need to go your route on this with dealer.
Had saved your previous thread for reference if I ever wanted to tackle this. Lots of good info and all the gurus aboard for help.
https://www.bronco6g.com/forum/threads/severe-duty-steering-rack-help.95588/
You said this then later you said that you installed in your garage in 2 hours? and have also done one on the trail?
There are definitely members here smarter than dealers, even people from dealerships that you wished were at your dealership.
Answer these:
1. Did you use software to program...