Search results

I'm trying to troubleshoot my electric stabilizer bar, hoping I can get some help. Essentially I added a oem stabar disconnect to my big bend. In the last few months I've been getting a popping sound when turning hard, it wont do it again untill I turn the other way hard (enough for some body...

I put a OEM disconnect on my big bend. I'm getting some type of pop/creak coming from that area when I get a little bit of body roll. For instance in a turn hard right it will pop. It will not pop again until I turn hard left. Same goes for things like turning into my hilly driveway. This...

I got Asfir underbody skids. After getting it dirty, and even after cleaning, I get a squeak and even minor popping when turning the wheel. I traced it to the 2 Skid mounting points right near the Steering rack. If I pop the skid off and clean all the mating surfaces, it generally goes away...

Looking for someone who wants cloth seats, and has MGV seats. I have the cloth seats. From a big bend with heated seats and manual adjustments. Figured with cloth seats no longer being offered, I may get someone. I am located in MN.

Not sure where to post this on the interwebs, but I'll be in Hot Springs 10-28-23 to run some stuff solo. Wouldn't mind tagging along with a group.

Since getting about 10k or so ago, I've had some type of minor vibration, very minor. Haven't worried about it much, but put new tires on and went about 1500 miles on a trip, it started to bother me. I'm pretty mechanically inclined, I fix most of our work trucks and am very hands on. Even...

Does anyone know what type of wire connectors/plugs are used on the sway bar disconnect? There are 3 plug ON the disconnect, and 1 from the harness to the vehicle side harness. It does not seem that you can order this harness by itself. Going to add a sway bar disconnect to a big bend and some...

Selling a AGS Air-Gate Compressor mount for the spare tire. Used from 2-25-23 to 7-1-23 Includes all parts from the kit. NOT PICTURED BUT INCLUDED: 8x bolts/ washers for the spare tire carrier, these are the ones that come from AGS- never used 8x extended bolts/washers for use with a tailgate...

Looking to trade my carpet flooring for your washout flooring. 4 door front and back. Could also throw some cash or trade. Could do the install also for both.

Theres a video floating around of basically using a Jack to compress the springs, undoing the top bolt, and lowering the jack to let the strut go free. It's a Toyota Video. Has anyone tried this on the bronco? How'd it work? Easy? Safe-ish? I understand it's not going to be as safe as an...

Big Bend SaS After added a Fab Fours stubby and Winch- I got an additional .5-.75" front sag. Total rake now is about 1.5". I'd like to raise up the front to be at about .5-.75"rake, and also bring the back up a bit, maybe an inch. That would essentially mean bringing the front up ~2" and Back...

I have a big bend, non SAS. Found that I may want to do more wheeling than I thought. For the thread purposes, I DO NOT want to get a new SAS bronco. Does anyone have a definitive parts list for doing a swap? I know I'll need to be replacing both axels. I think I'd go with 4.7 gearing. From...

Have been looking for a while now, figure I'd post on here. Looking for a Modular Bumper. I'm located in MN but would be willing to drive a bit.

Wondering if anyone knows if the ASFIR front bash/skid plate will fit the fan fours stubby bumper?

My running boards for your rock rails, 4 door. Located in MN. I WOULD ship as well!

Looking for SAS suspension, 4DR, 2.7 auto w/ tow would be a perfect world. Located in MN, would drive if semi close by. Would pay Cash. Would pay shipping depending on asking price.