Search results

For sale - $440 Passenger side Velox offroad gull wing doors for the 4 door MIC Hard top. Includes hardware and keys for the locks (they are keyed alike) More info https://offroadalliance.com/Velox-Bronco-Rear-Window-Gullwings/ Local pick up in Covington WA only. Driver side available for...

For Sale $180 $140 - Dobinsons C19-566 lift springs. These fit the OEM Bilstein shocks or Dobinsons IMS shocks I ran these for about 200 miles before swaping to a different set up. Netted 3.5" of lift on my 2022 Badlands Sasquatch 4dr with winch and bumper. $180 picked up from Covington WA...

For Sale $180 - Dobinsons C19-564 lift springs. These fit the OEM Bilstein shocks or Dobinsons IMS shocks I ran these for about 1000 miles before swaping to a different set up. Netted 2.5" of lift on my 2022 Badlands Sasquatch 4dr with winch and bumper. $180 picked up from Covington WA 98042...

I have a DV8 competition rear bumper that has worked well for me except for the mounting hardware from the frame bracket to the bumper it self. the stock hardware is ~8mm and uses speed nuts into the bumper to mount. The speed nuts appear undersized for the holes in the bumper and start to pull...

Over the summer I took a hit with a rock on a trail and folded my front driver a arm mount tab a bit. decided after straitining the tab that some reinforcement was in order. ordered up and installed this kit from Barnes 4wd...

Been a bit of a process to get here but I finally have both of my gull wing doors installed in my 4 door to replace the rear hard top glass. Product info: https://veloxoffroad.com/bronco-4-door-model-drivers-side-gullwing/ Step one was to remove the glass from the hard top. I wanted to keep...

For sale - 2022 Ford Bronco Badlands Skid Plates includes front plate, both cross member plates and the transfer case skid plate. All the OEM fasteners also included. A few small scrapes but no damage. Asking $400 for the set. Local pick up in Covington WA. this is the only scrape I could...

Got out for a long weekend with my wife, our 2 boys and dog. I wanted to share some pictures from the trip... We ran a trail I have done before, it’s steep-ish with sustained hill climbs around 20 degrees. Lots of loose rock and it’s a bit narrow but a fun trail overall The bronco made...

Anyone interested in a brand new capable steel bumper? Just pulled from my badlands. LED fog lights included. With less than 500 miles on it. Does not include tow hooks or parking sensors. I built a replacement bumper for the rig this weekend and don’t need the old one floating around...

I ordered my rig with the capable bumper to gain fog lights knowing I would build one when the rig arrived. Im no pro fabricator but this is what I came up with. set out to make the winch mount strong and not block the ACC. Started by placing the winch and a Barnes 4wd winch plate. then I...

Mocked up a carrier for my maxtrax off the back of my Bronco. Started with a RC tail gate reinforcement plate and built a rack to hold them off to the side. I will likely fine tune this a bit and add provisions for my chain saw also but the tracks are a good start.