Search results

I wonder if @Turn Offroad thinks it would work?

@EZ4x4 Any idea if the hard top remover lift would work on a turn offroad top? It is basically the same as the oem top in the rear, but the middle section is permanently attached... Picture: The front panel is separate, everything above the middle row and back is one piece.

With the rough country on a 4 door, there is a place on the driver's side to mount it. On the two door the rough country comes with an adapter plate that has to be used to mount in a similar location.

I wonder what the taxes would be on this….

I wouldn't think so, it changes nothing stock except for having to cut a plastic insert to be able to get the wires from outside to inside the cab. Though I guess they could try to blame something electrical on it, but it's not like a lift that's changing physical geometry of the suspension /...

This is what it looks like with a non-sas carrier with sas wheels and tires :) Cause the camera doesn't stick out as much, you get a tiny sliver of the tire creating a line in the picture.

Yes. The SAS sticks out a bit more, especially the camera. And this works fine with the non-sasquatch one, which is what I have.

They never did respond to my email on the stripes.

Can be seen here.

You can remove the b pillar plastic and use the bolt on top of the seatbelt assembly for ground. it’s where the rough country / go rhino power steps get grounded.

pm sending

There's only one ground at the battery, should be directly on negative terminal (or that big black plastic bit attached to it that has another stud on it. There's two grounds on the sensors for the doors. They're typically attached to a bolt for the seat belt that's behind the plastic of the B...

My cart arrived and I got it together. Really like it. Now if I could just figure out some way to not have to bend/squat down so much to get the doors on it :D

Having just installed these I'm curious if you have contacted Rough Country? Other than checking grounds, did something get stuck on the sensor and it thinks the door is still closed?

Why do you have to be in Houston? :) Thinking about these, but that's a 2+ hour drive each way for me. Darn.

Mine's been working fine so far. I upgraded from the standard badlands bead-lockable wheels/tires to sasquatch ones. Doing so means the wheel pushes on the 3rd brake light mount, where my camera is mounted. It's ended up stabilizing the camera :) All my shakes are gone. Woot!

Welp, I don't know how often I'll be driving with my doors off.. But I just placed my order. Annnnd just saw if I'd have ordered via Amazon I could have had them tomorrow. Oh well :)

JB weld would have probably been better. :)

Yeah. They skipped that step.