Search results

The DV8 kit is in 2 parts, one plate bolts to tailgate and then there is the cover that bolts on to that plate. The first plate has a foam/rubber gasket that the top part seals against. The license pate could be lifted away from the mounting service with some extra washers I guess. I did...

SO I played around with adjusting the passenger rear door glass, raising the window up helped a little. I also noticed that there seems to be some leaking air on the hard top as well as around the license plate light on the DV8 spare delete. I loosened the spare delete plate and that seemed to...

Nothing in the Cargo area, and no spare tire carrier.

Thanks!

When my AC is on, recirculate turned off, fan speed above 4, I will get a whistle noise form the drivers side passenger window at freeway speeds. When you stand outside you can hear and feel the air rushing out at the top of the window or between the hard top panel and body. The dealer has...

If its this guy well....

Ya why not

All Brands have issues, go on any forum and you can see people having issues with 100K trucks all the way down to lower end KIAs. Anything made by human hands is subject to failure. The amount of people having issues is probably less than 4% in any given brand.

Aww look at you...

Don't worry little buddy...someday you can play with the big boys too.

Ya only because I trailer to trails more than 1.5 hours away and drive my truck part of the time as well.

Well, Iam not complaining and bragging about the new Junk Bronco I bought.....so... Yes.

I dont have a "car"... But my Bronco has been flawless in 8000 miles.

I typically don't buy junk even if it looks good... But hey it's your money.

So why DID you buy a FORD exactly?

Curious why you are patching those thin metal brackets and not cutting them off and doing a thicker aftermarket steel bracket? https://barnes4wd.com/products/bronco-rear-axle-upper-control-arm-brackets https://barnes4wd.com/products/bronco-rear-axle-strut-mount?_pos=16&_sid=4cf574ff8&_ss=r...

I think this is what the OP is hearing. These Broncos have more routine noises during start up and shut tan my 3500 Diesel truck!

If you wheel your bronco often, you should NOT (if helped) be rewelding the stock brackets, yo SHOULD be looking for heavier 1/4 IN aftermarket brackets and stop playing around with the OEM stuff. https://barnes4wd.com/collections/ford-bronco-suspension-brackets