Search results

@jtrh0ne I’ve outfitted my Bronco with this set-up. Installing the brackets gets a bit tight — I used the SOTG bolts w/ the SS brackets to anchor both to the Bronco. The only modification you’ll need to make is cutting off about an inch of the SOTG sub-floor (the end facing the backseat) so...

@Mabett can the handles or internal springs be modified so that the handles don’t flare upward / run at 90 degrees? I have a set and they currently press against my hardtop (leaving imprints along the sound deadening liner) and when my top is off, they just look super dumb sticking up over the...

I’ve installed 2 SlipStreams and don’t understand how it could possibly raise the entire hardtop. The top side of the SlipStream tucks under the Bronco’s side ‘cargo shelves’, which the hardtop sits on top of. The lid rests slightly lower than the top side of the tailgate so there’s really no...

I feel ya. Honestly, that particular SS cover plate prob needs an edge protector or the weatherstrip could be a firmer material 🤷‍♂️… it def seems like a fixable issue. The main piece that rests just above the tailgate is fine.

Clarification on the hardtop/SlipStream compatibility. Assuming you want to install the SlipStream hardtop conversion kit — mainly the 2 cover plates that fill the gap where the soft top latches used to be — there is definitely contact between the cover plate edge and the weatherstripping of...

In terms of hard top accessory ideas, any chance @Turn Offroad would consider offering an alternative headliner, even if it’s Velcro backed panels like Hothead Headliners? My dogs are going to turn this carpet liner into a shag rug in no time.

Thanks for the great customer service @Turn Offroad; received email confirmation of the new part shipping this morning. Also, wanted to confirm there was no damage to the plates on the hardtop; just the screw.

Yes; just the screw was broken

PSA: Do NOT over-tighten latches because you will destroy the screws. Also, you may want to assume that if you take the targa off, you should loosen the bolts before re-latching. I had my targa on / bolts tightened accordingly during the week. Took it off this weekend and when I went to...

Personally, I think Ford made it impossible to replace a windshield without the frame getting scratched/dinged up. I had my windshield replaced, same issues occurred, glass company covered body repair/paint expenses, If you have an Air Design windshield frame on, you’ll definitely want to remove...

What are the dimensions of that domed TOR decal? 1”x3”?

Right after they fix the air circ button BS. Unless it’s on Max AC, it won’t stay on. Which (1) negates the point of having a friggin’ button for it and (2) makes you choose between heat or outdoor stank/exhaust in colder temps.

My husky & golden say you’re obligated to take it to @Hothead Headliners so they can get to work on a pet-owner-friendly liner that’s more hair-resistant 😂😭😭😭

@TURN Todd Re: future hardtop accessories, I thought I’d drop this suggestion here since your window hinges have a different shape (& prob different mounting points) vs OEM:

Unless @Razorback wants to pick up my order while he’s visiting @TURN Todd and earn some shipping commission 🙃

I should be joining the club a month after you 👀

Done!

Ditto @TURN Todd

I‘d think that going in order of a list based solely on product updates/announcements is a bit flawed. Obviously, not my process nor the logistics my problem…just seems like you could have a lot of curious / prospective / future customers ahead of serious, take-my-money-now, buyers? If that’s...

@TURN Todd are ya’ll live yet ?