Search results

I have the Genesis kit installed, but I used the Odyssey ODP-AGM25 batteries. I wanted the extra capacity and wasn’t worried about the weight. It's a very tight fit in the Bronco engine bay, but I am really pleased with the kit. (y)

OOPS...

Ergo... what? 🧐

Unfortunately, I do not have any pics of my lift points on my 4-door or of my friend’s 2-door on the lift. The lift points I used were all on the frame, with the front lift points at the marked spot referenced in the owner’s manual, and the rear lift points at a convenient spot in the lift rear...

It can be done with ratchet straps, but it would be a real pain in the ass to do in the field, especially if the tank is already leaking fuel. The ratchet strap technique is described in the video below from Kevin at JCR Offroad.

Welcome to the forum. Sorry to see your Bronco damaged. 🙁 Hope the deer survived. 🙏

Phil Abbett (@flip), VP/Partner at Ruxer Ford in Jasper, Indiana, posted some parts diagrams a while back. He may be able to get a replacement part for you. I suggest you reach out to him via DM or simply contact him by phone at his dealership. I buy most of my parts from Ruxer because of the...

It's not part of the IAG EZ Lift kit, which I have installed. (It was not added when I installed the kit.) It seems to be there for lateral support to hold the bottom of the soft top against the extended tab in the photos below to prevent sideways movement.

Mark, I like what I see in your Sidewinders, but I have made a significant investment in aftermarket skid plates, and I need confirmation that your product would be compatible before ordering. Can you please check to determine whether your rock sliders for a 4-door Bronco are compatible with JCR...

Same here. A quality winch upgrade has been on my mod list for a while, but the price today is too good to pass up. Truly a screaming deal! Thanks, OP! 👍😎

"Permanently closed" and escaped in a wheelchair !!! 😬

I suspect that an Everglades VIN number can be used to gain access to download the "RCM - Winch Configuration" file, like several users did for their steering rack upgrades, since Everglades comes standard with the winch installed. The follow-up question is, does that require FDRS to install it...

The programming procedure is described in the excerpt below. I wonder if this can be done in FORScan?

The quarter panels are carbon steel and will hold a magnet. https://www.bronco6g.com/forum/threads/we-thought-the-bronco-had-aluminum-body-panels-we-were-wrong-how-did-we-miss-it.50423/post-1523761

<IRS enters the chat> 🍿

Respect! Not all hero modders wear capes! :cool:

That seems like something your evil twin brother Tricky Dick would have posted. :wink:

Correct… Just regular Torx 45 (T45).

If the tires are already balanced with beauty rings, you don’t need to rebalance them when you swap to bead-lock rings, as long as the tires are installed in the same locations/orientations on the wheels. Just mark each of the tires and wheels with a grease pencil and then match up the marks...