Search results

Rustoleum textured black, spray it pretty dry it’s a perfect match. You can kinda dab with a microfiber as needed to taper in a edge if need be. I bought my mod bumper second hand with some imperfections. Used that paint and you would never know I fixed it. I can get you a picture of the can...

Sorry I sold it locally and forgot to update the post.

For those that have ordered, I’m assuming when you ordered you are not able to apply any discounts. Price is what the price is at 4995$ being able to put a 20% off coupon on top of that would be a nice discount.

Do you know how much they weight per tire. Can’t seam to find that anywhere. Also what is the tread width?

Either way based on the little info provided there are differences in the racks. Like you said may be a simple change in forscan to correct for ratio. If only we knew what to change. On a side note I wonder how they deciphered all the code to come up With the f150 spreadsheet. Livinitup is the...

Looks like the cyanlabs info matches the f150 spreadsheet. But here is where I don’t know that I fully agree that xxx* is the rack ratio. The rest of the hex code doesn’t seem too jive. In regards to 760-02-01 both cyanlabs and f150 sheet say that *xxx is wheelbase but from what I pulled a 4...

Ok so I took what your saying and dug into it a bit more. I pulled various as built data from several different broncos and the number you referred to ranged from1-4. My question is how do you know what that number means? I’m assuming you pulled it off the f150 forscan spreadsheet? But I’m...

Do you know what the ratios are?

Sold

Central pa. Lock haven area

Bump

Bump

Since we are sharing my pair

So close but not quite what I was looking for lol

Well done! Next challenge please

Edited post to include next challenge. Unless I’m over ruled 6th gen bronco with a 1st gen bronco.

@ToothlesstheBronco Unless over ruled next challenge is your 6th gen bronco with a 1st gen bronco.

Just to confirm did you need to have your stock rack plugged in before saving the stock file?

Did you have to pull program from old rack for procal. I thought that was mentioned somewhere but maybe not needed?

How does the upgraded rack feel to drive vs the one you took out? Curious to know if the procal calibration is different than the FDRS way of programming. Some opinions on the FDRS way are that the upgraded rack is harder to steer at speeds but easier slow/stopped.