Search results

  1. ICON 3" Level Lift Spacer Kit

    I'm sure the other mfg's have their reasons for doing it the way they did. But ICON is first and foremost a suspension company, not a "lift kit" company, so I'm confident our designers have their reasons for doing it this way. I will admit that I'm not as well versed in that specific question...
  2. ICON 3" Level Lift Spacer Kit

    Hardware included! (y)
  3. ICON Black Friday Deals!

    We're at the corner of Lincoln and Jefferson, a block east of the car dealerships, however we do not have a will call counter (all orders have to be shipped, but we ship for free), nor do we do installs. But just about any off-road shop in the area is an ICON dealer and can help you out if you...
  4. ICON 3" Level Lift Spacer Kit

    A teeny tiny amount. But you can simply scoot forward a bit or temporarily raise the seat, if you come up to a rise or obstacle and temporarily need to see more of the ground in front of the hood. I do that anyhow. By the way if you're one of the rich kids with those fancy trail cameras its a...
  5. ICON 3" Level Lift Spacer Kit

    Dang it I did all those replies from the wrong account LOL. Oh well, carry on :)
  6. ICON Black Friday Deals!

    The discount code above is valid only on ICON's website. Our ICON Dealers have also been authorized to match the discount so please inquire with them if you would like to purchase from a dealer. Happy Thanksgiving everyone!
  7. ICON 3" Level Lift Spacer Kit

    The ICON Leveling Lift Kit for 2021 and newer Ford Bronco provides an easy to install, economical yet performance-enhancing method of gaining the necessary clearance to run larger tires. The kit consists of CNC machined 6061 billet aluminum top spacers and pre-load spacers to yield...
  8. ICON Alloys - Current List of Bronco Compatible Wheels

    Yeah they've been out there for a month or so now. I've no clue why they're not showing on our own website, I'm not on the web team. Check with whichever ICON dealer you're going to purchase from. They may not have them on their own website yet but they can order them.
  9. ICON Billet Rear Upper & Lower Control Arms

    I'll answer under my ICON account. Yeah these are getting close to release. That might come shortly after Thanksgiving. There have been some slight changes in the design and installation procedure that they were finalizing this week. I'm not sure if you've seen any of the third party reports...
  10. ICON Alloys - Current List of Bronco Compatible Wheels

    Hey Brock I hope you don't mind if I answer your question here in the open forum rather than private message, as there may be others who are wondering the same thing. In the PM you asked: The Rebound Pro with 25mm offset (or any of our 17X8.5 wheels with 25mm offset) will be our closest match...
  11. ICON Alloys - Current List of Bronco Compatible Wheels

    I'm not sure which photo or post you're referring to, but I've had 4 different tire/wheel combos on mine in the few short months that I've owned it. It was a non-Squatch Base so of course it came with the 30" Bridgestone Duellers on 16" steelies. Then ICON loaned me a set of 35" Nittos on a...
  12. ICON Alloys - Current List of Bronco Compatible Wheels

    Because yours is a less common use-case. Most folks who intend to do the type of wheeling that might require a Beadlock will tend to want larger, wider, taller tires. The factory Sasquatch wheel and tire size combination are just about perfect, so our 25mm offset wheel closely matches that...
  13. ICON Rebound Pro Wheels with InnerLock Bead Retention Technology

    They are not yet available in 18". I do believe we intend to offer an 18" version at some point but I have no clue on a timeline for that happening. But these will fit your Outer Banks, with some new tires :) If you're going to be doing the type of wheeling that benefits from airing down and...
  14. ICON Alloys - Current List of Bronco Compatible Wheels

    Next time I have an opportunity to get that exact photograph I will do so and post it.
  15. ICON Alloys - Current List of Bronco Compatible Wheels

    Vectors are 30 lbs. and Rebound Pros 31 lbs. These and the weights listed on the website are all shipping weights (includes box and packaging materials). Actual weights are a couple of pounds less. For example the actual weight of the Rebound Pro is 28 lbs, and standard Rebounds are 27 lbs...
  16. Make your Bronco an ICON - Intro from ICON Vehicle Dynamics

    It should be any day now, we're just waiting on pricing and some additional info. I'll create a new thread for it when we have all the info gathered up, hopefully this week sometime.
  17. Icon Vehicle Dynamics Bronco Build at SEMA 2021

    when I know, you’ll know :)
  18. Icon Vehicle Dynamics Bronco Build at SEMA 2021

    Thanks! Yeah we're still dialing these in for optimal ride and performance. The rear coils are a triple-rate spring, but we are still fine tuning the spring rates on it. But the coolest thing about this Bronco is that the shocks on it use our new CDEV technology, electronic valves controlled...
  19. Icon Vehicle Dynamics Bronco Build at SEMA 2021

    @Hey19 is right. It's an adjuster sleeve, tightened by the two pinch bolts. It's a pretty slick setup. You can make small adjustments to the overall length of the control arm by turning that sleeve. That adjustability can be useful in a coilover setup that can be set up at a range of lift...
  20. ICON Alloys - Current List of Bronco Compatible Wheels

    Since there are so many of them I'll refer you to the ICON website to check the weight for any specific wheel you're looking at. Off the top of my head Rebounds are 27 lbs, most of the others are somewhere in that neighborhood but for exact weights please check the website. Or if that's too...
Advertisement
Top