Search results

  1. Black Diamond on 33’s and 17X9 Bronze Fuel Shok +1 offset

    Went from “swol” to “skipped leg day” in an hour! Those wheel wells are slightly hallow! But tis the season to not slide off the road or worse into the guy in front of you! The BD in my opinion is the most Canadian package, wash out floors, winter tires on steelies and heated seats and all...
  2. Black Diamond on 33’s and 17X9 Bronze Fuel Shok +1 offset

    Thanks I tried to match up angles as best as I could, more useful for people to get an idea of what their bronco would/wouldn’t look like?
  3. Removing these 3 constraints / commodities will improve your Bronco order’s chances of getting scheduled - says Ford

    Yes there’s a power wire with a fuse that runs off the battery to the back it’s the only “wiring” to do but you don’t have to cut/spice into your factory harness. There is a pre wired box that it connects to, I mounted the box up on top of the frame cross member at near the hitch. I think the...
  4. Removing these 3 constraints / commodities will improve your Bronco order’s chances of getting scheduled - says Ford

    Curt has a plug & play harness, took me about an hour start to finish. Also was far cheaper than the $600CDN trailer tow pkg so there’s that!
  5. Black Diamond on 33’s and 17X9 Bronze Fuel Shok +1 offset

    LIFT OFF! (Original post above edited with pictures) Definitely sits way higher, feels very different out on the road!
  6. Black Diamond on 33’s and 17X9 Bronze Fuel Shok +1 offset

    Yah it’s a big issue and having an oil coating done is really the only way to prevent rust aside from parking it inside during the winter!
  7. Black Diamond on 33’s and 17X9 Bronze Fuel Shok +1 offset

    Yes, I’ll be switching back to the factory wheels tonight after I get some pictures with my lift. I’ve been pretty careful driving around the last couple days!
  8. Black Diamond on 33’s and 17X9 Bronze Fuel Shok +1 offset

    Front windows tinted, before & after:
  9. Black Diamond on 33’s and 17X9 Bronze Fuel Shok +1 offset

    My ATX’s are my dedicated winters! I love General Tire I’ve been running them as a winter for years!
  10. Black Diamond on 33’s and 17X9 Bronze Fuel Shok +1 offset

    I was built on 6/23 and finally got it on 11/17
  11. Black Diamond on 33’s and 17X9 Bronze Fuel Shok +1 offset

    Here in Canada we have a couple major oil spraying companies to keep salt from destroying your vehicle. The two main ones in my area (Ontario) are “Krown” and “Rust Check” who are both good. https://www.krown.com/en/ https://www.rustcheck.ca/ So it’s not really a mod, just on the list of...
  12. Black Diamond on 33’s and 17X9 Bronze Fuel Shok +1 offset

    It’s the Yakima Skyrise HD in the Ford Accessory Catalog, here is a picture of it mounted in a 2 door. I opened it on the floor of my garage and it was pretty big inside. For context I was in the infantry so it’s the penthouse suite as far as I’m concerned! The 4 door definitely checks all the...
  13. Black Diamond on 33’s and 17X9 Bronze Fuel Shok +1 offset

    I’ll be fitting the RTT first on the factory crossbars. Seeing as it’s a very small 2 person tent I’m hopeful it’ll be ok, if all appears strong and safe I won’t fork out for the Yakima crossbars. I’d prefer to keep it as low profile as possible and to also save some money using the OE bars? I...
  14. 📝 My Letter to the Ford Executive Team: Safety, Manf. & Quality [and Ford Executive's Follow-Up Response Call]

    Hood dent/warping! https://www.bronco6g.com/forum/threads/anyone-notice-poor-hood-alignment.28960/
  15. Black Diamond on 33’s and 17X9 Bronze Fuel Shok +1 offset

    I absolutely don’t “need” the lift, at least in terms of tires rubbing, but I do want a little more ground clearance and load carrying capacity.
  16. Black Diamond on 33’s and 17X9 Bronze Fuel Shok +1 offset

    Yah it’s definitely more attributed to the rim offset, but that 10mm width does make a difference too! Here’s a picture I took last night of my BD beside a stock (non sas) badlands. I parked “mirror to mirror” to avoid any weird perspective trickery. I imagine once I have the 2” lift done...
Advertisement
Top