Search results

  1. Industry First: ARB Compressor Engine Bay Mount from KR Off-Road (NOW SHPIPING)

    Yeah, it's not seating properly. Make sure you pull back on the hose connector and push the gauge all the way in, then release.
  2. Industry First: ARB Compressor Engine Bay Mount from KR Off-Road (NOW SHPIPING)

    Yeah, at some point when I'm bored, I may turn my compressor with the wires facing the engine. However, I did rotate my outlet to the 45 degree point.
  3. Industry First: ARB Compressor Engine Bay Mount from KR Off-Road (NOW SHPIPING)

    I cut the factory zip tie and just pushed it forward. Once I tightened the bracket down, I just lifted the tube up and zip tied it to the bracket. putting it on the other side of the bracket would put it right up against the wheel well cover. That cover covers most of the shock mount with the...
  4. Industry First: ARB Compressor Engine Bay Mount from KR Off-Road (NOW SHPIPING)

    I did cut the factory zip tie and I moved the tube out of the way until I got the support backed mounted. Then I zip tied the tube to the backet using the 2 slots on the bracket. I guess I tied it to the wrong side of the bracket, but it didn't impede the install of the bracket at all. So I'm...
  5. Industry First: ARB Compressor Engine Bay Mount from KR Off-Road (NOW SHPIPING)

    I just tried to get a good picture, but there is just too much stuff in the way. I'm not going to uninstall the compressor that that. I think one difference that may have thrown me off is that only the shock bolt we need to loosen is visible. The other 2 are covered by the wheel well liner...
  6. Industry First: ARB Compressor Engine Bay Mount from KR Off-Road (NOW SHPIPING)

    I think you will be fine. I was calling out that there is something different about the shock mount on the badlands/SAS. It doesn’t look like the install instructions. Also I was expecting to have to bend the support bracket to lineup the bolt holes as much as I did. But it’s all installed...
  7. Industry First: ARB Compressor Engine Bay Mount from KR Off-Road (NOW SHPIPING)

    I must have missed that part, but it all worked nicely. Make sure you were some gloves when installing the 2 Carriage bolts, talk about knuckle busters. :) Other than the broken connectors on the back of the compressor, i'm very happy with the results.
  8. Industry First: ARB Compressor Engine Bay Mount from KR Off-Road (NOW SHPIPING)

    Ok, all done and intial smoke test complete. I wired it up to AUX5. I think i'm still going to call ARB about the broken connectors in the back of the compressor. A few things to note. There was something different on my Bronco's shock mount bolt from the one in the instructions and the Party...
  9. Industry First: ARB Compressor Engine Bay Mount from KR Off-Road (NOW SHPIPING)

    The outer box was a bit loose, but intact. The inner box looked like one side was coming a part. Didn’t notice the broken bits of the connectors until mounted and went back to look in the box.
  10. Industry First: ARB Compressor Engine Bay Mount from KR Off-Road (NOW SHPIPING)

    I’m installing now and noticed that the connectors on the back of both compressors were smashed during shipping. Should they be connected or are they for accessories and I can just shrink wrap them and move on? @4x4TruckLEDs.com
  11. Is there a storage bag for the soft top windows?

    Here are some pictures out of the box. I haven't installed the windows because it too cold to take them out right now. :)
  12. Is there a storage bag for the soft top windows?

    I just got my BJD customs bag this week. I haven't had a chance to try it yet. It was designed for the Bronco, based on feedback from a local Bronco owner.
  13. ACC Relocation

    I'm thinking of purchasing this for my Bronco so that I can install the JCROffroad winch plate for the modular bumper. Has anyone done this on their Bronco yet? Thanks.
  14. JcrOffroad - Armor prototyping begins!

    Oh wait. I think my questions were answered at the bottom of that page. :)
  15. JcrOffroad - Armor prototyping begins!

    @JcrOffroad Will your camera relocation kit work with this? JcrOffroad: Bronco Winch Plate | 6th Gen (2021+) Steel Bumper Would this mean that I could keep my modular bumper and have a winch with camera function? :) Thanks.
  16. Found Bronco Raptor w/ interior red trim accents and Ranger Raptors

    Oh I get that. I don't have a need for a raptor version myself. I gave up my Raptor for the Bronco I have now. Loved the Raptor, but I can hit more trails in the Bronco.
  17. ARCHETYPE RACING | BAM-BYODR (Billet Aluminum Modular Bring Your Own Device Rail)

    I want another Bronco Velcro patch. I stuck mine on the back side of the back seat.
  18. Found Bronco Raptor w/ interior red trim accents and Ranger Raptors

    Is the Braptor running 35s or 37s?
Advertisement
Top