Search results

I bought them for my 2 door, they're great! Unfortunately the 2 door versions have the PU vinyl on the rear seat seatbacks, so the seat back protectors will not adhere with the Velcro. Maybe I can add Velcro tape to the seatback. The 4 door covers are available with felt rear seatbacks, to use...

The 4.27 includes the locking rear, hence the higher cost. That's more of an advantage for off-road use. Or if you plan on non-SAS and upgrading to 35" tires, the 4.27 gearing helps make up the difference of the larger dia tires. The SAS suspension is a little softer, the stock is more firm...

The larger diameter of the tires makes up some of the difference in the gearing. For example, going from a 32" diameter tire to a 35 is a 10% increase. Going from a 3.73 to a 4.7 rear is a 26% increase, so the real difference between the gear/tire combo is about 16%. Looking at it another way...

Mine was in an envelope on the seat or floor. I 'visited' my Bronco within the few hours after it arrived at the dealership. I snagged the build sheet at that time, asked the sales guy if I could keep it. He said 'sure, we just throw them out'.

Nice setup! @ $179 it's a great alternative for those without the factory aux switches.

What's your budget? Modular bumper or ? Are you sure you want the fog light pattern? They mostly add light to the shoulders and right in front..... GREAT pics by Oldhippie above! I posted my setup, about $300, a few posts up, post # 20. Diode Dynamics are $$$, SuperBright are $$, NiLights on...

Interesting. My March '23 built Base would ramp on/off. It bugged me so I just turned the auto function off. My issue was I didn't notice the auto hi/low switching. So I often 'dimmed' my hi-beams when I was actually turning them on when traffic approached. Maybe I should just have more faith in...

That's a boring choice, but it's what I used my points on too. ;) As far as accessories, the aftermarket has a lot of better choices at lower prices. The Ford hood struts are made by Redline and would have been one of my top choices. Then maybe the floor and cargo mats. Ford Accessories has...

I was considering those. Didn't see many reviews or comparisons to the SS3 lights tho. They were on sale around Xmas for 20% off. I wanted a lower cost setup too. I ended up getting a pair of the DD SS3 SAE fogs ($160 @ 15% off), eBay brackets ($8, normally $30) and a pair of 3" SAE driving...

Soooo.... 9 months after I took delivery of my BaseSquatch, I get that same notice from the Pa Dept of Revenue! They're saying the average sales price is $55,992 and want another $1,057 for tax due. It was easy enough to fill out their forms online, but their 9 month delay is crazy. My paid...

What's your objective? Do you have to replace your present water heater or are you trying to cut the cost of running it? Depending on how often and how much hot water you use, adding a timer may reduce it's power use. Tankless can be an option. Again, it depends on what your needs are. Assuming...

Transmission coolers are usually built into the radiator, therefor trans temp would be close to engine coolant temp. HD vehicles often have an additional trans fluid cooler (cooled by air). I don't know exactly what the Bronco setup is... A quick Google search says optimum temp is 175*-225*. At...

There's another A.S.S. eliminator at about 1/2 the cost. It's been mentioned on this forum before. https://www.amazon.com/Eliminator-Bronco-Automatic-Disable-Canceller/dp/B0BG2L8GJZ or https://www.amazon.com/Eliminator-Bronco-Disable-Canceller-Badlands/dp/B0BP9VGF4Y

You might want to add an iron dust removal step. I see The Chemical Guys have a 'Decon Pro Iron Remover'. https://www.chemicalguys.com/products/decon-pro-iron-remover-and-wheel-cleaner?

You're reading it wrong, or perhaps backwards. The orders are in the 'Retail USOB' column, the 'US Capacities' is what Ford can presently build. So Sasquatch comprises 57% of the orders, but Ford can only build 35%. That difference (-22%) is shown in red.

I did a budget upgrade on my 2023 2 door. For about $300, I got the Fusion amp from eBay, Kicker sub, and 4" Infinity Reference series speakers in dash and rear pods. Also the Metra harness plugs and 600 Hz filters for the dash speakers. It made a big difference in the sound, I'm happy with...

Agree they should repair the paint damage. I wouldn't worry too much about the glass defect. If 'n (if/when)it eventually fails, it should be covered. But yeah, paint damage is on the installer.... there should be no excuses!

Agree the 'repo' vin sticker appears to be the best option. I take it Ford will not issue a replacement vin sticker? Your vin has already been verified. Taking the easiest/best cost option to replace it seems to be the best way to go. You're staying within the law/requirements to cya.

The last list of constraints now includes the 2.7. So you now have hard top, Sasquatch and 2.7 possibly slowing your order. The Lux package was often a constraint in the past, but it's not currently on the list...

I wasn't even considering buying a new vehicle at the time. I had heard Ford was coming out with a new Bronco, so I occasionally did a Google search that led me to Bronco 6G. I heard about the reveal date, and hit up the Ford site that evening. I thought it looked fantastic! I considered it for...